Microduck Robot●microduck-robot.com

LEROBOT BY HUGGING FACE

LeRobot arm kits and parts.

Gather the hardware for an open-source LeRobot build in one place: SO-101 (SO101) six-axis leader and follower arms, Feetech STS3215 bus servos, a bus servo adapter and the LeKiwi mobile base. Pick the parts, follow the tutorial, record demonstrations and train a policy.

Shipping and taxes included · Confirm stock and your delivery address before paying.

A LeRobot SO-101 robot arm

From parts to a trained policy

A LeRobot build has five stages. Each one links to the matching part of our step-by-step tutorial.

  1. Choose the parts

    Pick a leader and a follower arm, the servos and the bus adapter. Controller, power supply, clamps and cameras are confirmed with your quote.

    Open this step →
  2. Assemble and calibrate

    Give every motor its ID, assemble both arms and calibrate them so the follower copies the leader joint by joint.

    Open this step →
  3. Teleoperate

    Move the leader by hand and let the follower repeat the motion, first without and then with cameras.

    Open this step →
  4. Record demonstrations

    Record episodes of the task you want to teach. The motion and camera images become the training data.

    Open this step →
  5. Train and run a policy

    Train an ACT policy on a GPU, then run it on the follower so the arm repeats the task by itself.

    Open this step →

LeRobot kits and parts

Match the arm, bus, power supply and controller to your build. Every arm is a 6-DOF open source robot arm built from 3D-printed parts and STS3215 servos. Prices are in US dollars; ask us if you need a part that is not listed.

Guides for your build

LeRobot parts questions

What is the difference between the Leader and the Follower arm?

The Leader is the arm you move by hand and uses 7.4 V servos. The Follower copies it and uses 12 V servos. A full setup needs one of each, and each arm is selected separately.

What else do I need besides the arm kits?

A servo controller board, a power supply for each arm, clamps and cameras. Use the power supply that matches the servo voltage of each arm, and confirm the exact items with your quote.

Do I need a GPU?

Teleoperation and recording do not. Training the ACT policy used in our tutorial does need one. A laptop-class GPU is enough, and a rented GPU also works.

Which LeRobot version does the tutorial follow?

The commands match LeRobot v0.7.0. LeRobot changes quickly, so compare the flags with the documentation for the version you install.

ALSO FROM US

Want a robot that walks?

Microduck Robot is an open-source biped robot duck kit built around Arduino UNO Q and 15 serial servos. Assemble it, calibrate it and control it from a browser.

See the Microduck Robot kit
Contact us