Microduck Robot●microduck-robot.com

Feetech URT-2 serial bus servo debug board

Servo control boards

Feetech URT-2 serial bus servo debug board

Order options

URT-2 · board + USB cable

US$45.00 · each Shipping and taxes included

Feetech's USB debug board for serial bus servos. Connect a servo to a computer, set its ID and test it with Feetech's FD software before you build it into an arm.

LeRobot SO-101 tutorial →Step by step: install LeRobot, assemble, calibrate, record, train and run the SO-101 and LeKiwi.LeRobot kits →SO-101 leader and follower kits, STS3215 servos, a bus adapter and the LeKiwi base, with a step-by-step tutorial.
Specifications
Model
FE-URT2-C001
Servos
SCS and STS series on the TTL bus; SMS series on RS485
Ports
USB-C, UART header, 5264 TTL servo ports, 4-pin XH RS485 ports
Servo supply
TTL 4.8–12 V; RS485 12–24 V
Software
Feetech FD debug software
Included
Board and a USB cable; confirm the cable connector with your order
Compatibility checks
  • Power the servos from a supply that matches their voltage; the USB port only powers the board.
  • Connect one servo at a time when you change IDs.
  • The LeRobot tutorial sets IDs with its own command and a bus adapter; this board is for checking and repairing single servos.

LeRobot kits and parts →

Technical references

BEFORE YOU ORDER

Get the right part the first time

Start with the part you are replacing, then compare the model, connections and package below.

What should I check before choosing this part?
  • Power the servos from a supply that matches their voltage; the USB port only powers the board.
  • Connect one servo at a time when you change IDs.
  • The LeRobot tutorial sets IDs with its own command and a bus adapter; this board is for checking and repairing single servos.
Which version or package should I select?
  • URT-2 · board + USB cable · each
Compare order options →
Which specifications should I compare?
Model
FE-URT2-C001
Servos
SCS and STS series on the TTL bus; SMS series on RS485
Ports
USB-C, UART header, 5264 TTL servo ports, 4-pin XH RS485 ports
Servo supply
TTL 4.8–12 V; RS485 12–24 V
Software
Feetech FD debug software
Included
Board and a USB cable; confirm the cable connector with your order
Compare order options ↑

Build notes & feedback

Used this part in a build? Tell us your exact model, selected option and what did or did not fit.

Share your experience ↗
Contact us