Microduck Robot●microduck-robot.com

Waveshare Bus Servo Driver HAT (A) with ESP32

Servo control boards

Waveshare Bus Servo Driver HAT (A) board with an ESP32 module

Order options

Bus Servo Driver HAT (A) · one board

US$100.00 · each Shipping and taxes included

A serial bus servo driver board with an ESP32 on board: control up to 253 bus servos such as the STS3215 over USB, UART, Wi-Fi or Bluetooth, and power a Raspberry Pi mounted on top.

LeRobot SO-101 tutorial →Step by step: install LeRobot, assemble, calibrate, record, train and run the SO-101 and LeKiwi.LeRobot kits →SO-101 leader and follower kits, STS3215 servos, a bus adapter and the LeKiwi base, with a step-by-step tutorial.
Specifications
Controller
ESP32-WROOM-32, 2.4 GHz Wi-Fi and Bluetooth
Supply
9–25 V through XT60 or a 5.5 × 2.5 mm DC jack
Host link
2 × USB-C and UART; a USB mode talks to the servo bus directly
Servos
Up to 253 ST and RSBL series bus servos, including STS3215
Raspberry Pi
Mounts on a Pi 5 or 4B and powers it from the onboard 5 V regulator
Board
65 × 57 mm, 3 mm holes on 58 × 49 mm
Compatibility checks
  • The input must match your servos and starts at 9 V: it suits 12 V STS3215 builds such as LeKiwi, not 7.4 V leader arms.
  • LeRobot talks to it in USB mode like a plain bus adapter; we have not tested it with LeRobot ourselves.
  • Servos and the power supply are not included.

LeRobot kits and parts →

Technical references

BEFORE YOU ORDER

Get the right part the first time

Start with the part you are replacing, then compare the model, connections and package below.

What should I check before choosing this part?
  • The input must match your servos and starts at 9 V: it suits 12 V STS3215 builds such as LeKiwi, not 7.4 V leader arms.
  • LeRobot talks to it in USB mode like a plain bus adapter; we have not tested it with LeRobot ourselves.
  • Servos and the power supply are not included.
Which version or package should I select?
  • Bus Servo Driver HAT (A) · one board · each
Compare order options →
Which specifications should I compare?
Controller
ESP32-WROOM-32, 2.4 GHz Wi-Fi and Bluetooth
Supply
9–25 V through XT60 or a 5.5 × 2.5 mm DC jack
Host link
2 × USB-C and UART; a USB mode talks to the servo bus directly
Servos
Up to 253 ST and RSBL series bus servos, including STS3215
Raspberry Pi
Mounts on a Pi 5 or 4B and powers it from the onboard 5 V regulator
Board
65 × 57 mm, 3 mm holes on 58 × 49 mm
Compare order options ↑

Build notes & feedback

Used this part in a build? Tell us your exact model, selected option and what did or did not fit.

Share your experience ↗
Contact us