A stronger servo in the STS3215 size
The STS3250 keeps the STS3215 body and bus, but runs at 12 V with a coreless motor, hardened stainless-steel gears and an aluminium case, for joints that carry more load.
- Torque: 50 kg·cm stall and 16 kg·cm rated at 12 V.
- Speed: 75 rpm without load.
- Current: 1.4 A rated, 4.2 A at stall.
- Encoder: magnetic, 4096 steps per turn, 360° range and a continuous rotation mode.
- Feedback and protection: position, speed, current, voltage and load; stall, over-current and over-temperature protection.
- Body: about 45.2 × 24.7 × 35 mm, 74.5 g, dual shaft, 25-tooth output spline, two 5264 3-pin ports.
In the box
The servo, two aluminium horn discs, a 3-pin servo cable and screws. The option with the debug board adds a URT-1 board and a USB cable.
Specifications
- Torque
- 50 kg·cm stall, 16 kg·cm rated at 12 V
- Speed
- 75 rpm no load at 12 V
- Encoder
- Magnetic, 4096 steps per turn
- Gears and case
- Hardened stainless-steel gears, aluminium case, dual shaft
- Bus
- Two 5264 3-pin ports for daisy-chaining
- Weight
- 74.5 g
Compatibility checks
- It runs at 12 V only: use it on follower arms, not on a 7.4 V leader.
- Its stall current reaches 4.2 A; size the power supply for every servo on the bus.
- Check the horn and mounting holes against your printed parts before replacing an STS3215.

