Microduck Robot●microduck-robot.com
Tools

Robot power and BOM checker

Compare power paths and a parts list before working with hardware.

Loading tool…

Review robot power paths and the BOM

Compare the declared electrical configuration with known component data. Keep the source voltage, converter outputs and servo current specification points separate.

Robot presets

  • SO-101 leader
  • SO-101 follower
  • Microduck UNO Q / V1.1

Rules version: 2026-11-12.2

Declare voltages and current evidence

Enter source minimum and maximum voltage in V and current limits in A. State servo count, simultaneously active count and the voltage of each current specification. Your own motor currents require a measurement or source note; unknown values remain unknown.

Check the route before choosing parts

  1. Choose a preset and review every source, converter, controller and servo branch. Confirm the actual input port and polarity.
  2. Enter known path limits and evidence. For regulated paths, supply output voltages and converter efficiency when known.
  3. Compare idle, declared continuous-load and all-stall scenarios, then inspect the findings and first-power checklist.

Useful project outputs

Save the project and JSON report, or export a BOM CSV with catalog product/variant references. A known subtotal is not a complete load estimate. Part links do not place an order or change prices.

Limits of an offline power check

Current data applies at its stated voltage; the tool does not interpolate. Continuous overload blocks that scenario, while stall overload identifies risk. Connector or fuse markings do not certify an assembled path. Battery capacity alone cannot establish robot runtime or physical safety.

Power paths: complete worked cases

Follow three offline calculations from declared inputs to reports. Supply, converter, path and board-load values are synthetic user declarations, not measurements. Servo currents come only from the stated voltage point.

Offline configuration checks do not verify physical hardware or safety. These synthetic reference cases are separate from the settings above. Import an example to check its inputs again; a saved verdict is not trusted.

A converter changes the current seen by the source

Can a 5 V load be added directly to a 12 V servo current?

Version baseline: Microduck electrical rules 2026-11-12.2 · Robot profile SO-101 follower / LeRobot 0.7.0 · C018 current specification A/0 2023-07-20, 12 V test point

Inputs and steps

Declare 12 V / 4 A, one C018 at its 12 V point, and a 5 V converter with efficiency 0.8, a 2 A output-path limit and a 1 A UNO Q USB load.

  1. Keep the servo branch at 12 V and the logic branch at 5 V.
  2. Convert the logic load to source current: 5 × 1 / (12 × 0.8).
  3. Add that input current to each servo scenario; compare each path in its own units.

Reference check result

No known configuration conflict

Source idle/rated/stall currents are about 0.550833 / 1.420833 / 3.220833 A; the +10% stall upper bound is 3.490833 A. No conflict is found against the declared 4 A source limit.

Inspect inputs and reference JSON
{
  "inputs": {
    "profileId": "so101-follower-v0.7.0",
    "supply": {
      "minV": 12,
      "maxV": 12,
      "continuousA": 4,
      "capacityMah": null,
      "nominalV": null,
      "chemistry": "external-dc",
      "polarityConfirmed": true
    },
    "paths": [
      {
        "id": "source",
        "label": "12 V source and servo branch",
        "parentId": null,
        "mode": "pass",
        "componentIds": [
          "waveshare-adapter-a"
        ],
        "limitA": 4,
        "limitSource": "Synthetic user declaration for this reference case: 4 A assembled-path limit; not a measurement.",
        "assembledVerified": false
      },
      {
        "id": "logic",
        "label": "Declared 5 V converter output",
        "parentId": "source",
        "mode": "regulated",
        "componentIds": [],
        "outputMinV": 5,
        "outputMaxV": 5,
        "efficiency": 0.8,
        "limitA": 2,
        "limitSource": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified.",
        "assembledVerified": false
      }
    ],
    "motors": [
      {
        "componentId": "sts3215-c018",
        "pathId": "source",
        "count": 1,
        "activeCount": 1,
        "performanceV": 12
      }
    ],
    "loads": [
      {
        "id": "uno-q",
        "componentId": "uno-q",
        "pathId": "logic",
        "port": "usb",
        "count": 1,
        "currentA": 1
      }
    ]
  },
  "status": "no_known_conflict",
  "findings": [],
  "outputs": {
    "scenarios": {
      "idle": {
        "complete": true,
        "knownSubtotalA": 0.5508333333333334,
        "totalA": 0.5508333333333334,
        "upperA": 0.5508333333333334,
        "paths": [
          {
            "id": "source",
            "complete": true,
            "knownSubtotalA": 0.5508333333333334,
            "totalA": 0.5508333333333334,
            "upperA": 0.5508333333333334
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      },
      "rated": {
        "complete": true,
        "knownSubtotalA": 1.4208333333333334,
        "totalA": 1.4208333333333334,
        "upperA": 1.4208333333333334,
        "paths": [
          {
            "id": "source",
            "complete": true,
            "knownSubtotalA": 1.4208333333333334,
            "totalA": 1.4208333333333334,
            "upperA": 1.4208333333333334
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      },
      "stall": {
        "complete": true,
        "knownSubtotalA": 3.2208333333333337,
        "totalA": 3.2208333333333337,
        "upperA": 3.490833333333334,
        "paths": [
          {
            "id": "source",
            "complete": true,
            "knownSubtotalA": 3.2208333333333337,
            "totalA": 3.2208333333333337,
            "upperA": 3.490833333333334
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      }
    },
    "paths": [
      {
        "id": "source",
        "label": "12 V source and servo branch",
        "parentId": null,
        "voltage": {
          "minV": 12,
          "maxV": 12
        },
        "knownComponentLimitA": 4,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 0.5508333333333334,
            "totalA": 0.5508333333333334,
            "upperA": 0.5508333333333334
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 1.4208333333333334,
            "totalA": 1.4208333333333334,
            "upperA": 1.4208333333333334
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 3.2208333333333337,
            "totalA": 3.2208333333333337,
            "upperA": 3.490833333333334
          }
        }
      },
      {
        "id": "logic",
        "label": "Declared 5 V converter output",
        "parentId": "source",
        "voltage": {
          "minV": 5,
          "maxV": 5
        },
        "knownComponentLimitA": 2,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        }
      }
    ],
    "bom": [
      [
        "role",
        "path",
        "component",
        "quantity",
        "productId",
        "variantId",
        "sourceRefs",
        "verification"
      ],
      [
        "servo",
        "source",
        "Feetech STS3215-C018",
        1,
        "lerobot-sts3215",
        "sts3215-c018",
        "c018-a0",
        "offline-configuration; hardware unverified"
      ],
      [
        "path component",
        "source",
        "Waveshare Bus Servo Adapter (A)",
        1,
        "lerobot-bus-adapter",
        "waveshare-bus-adapter-a",
        "waveshare-faq",
        "component rating only; assembled path unverified"
      ],
      [
        "logic load",
        "logic",
        "Arduino UNO Q",
        1,
        "uno-q-2gb",
        "abx00162",
        "unoq-r16;luwu-v11",
        "declared load; hardware unverified"
      ]
    ],
    "runtimeHours": null,
    "assumptions": [
      {
        "fieldPath": "paths.source.limitA",
        "value": 4,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration for this reference case: 4 A assembled-path limit; not a measurement."
      },
      {
        "fieldPath": "paths.logic.limitA",
        "value": 2,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified."
      },
      {
        "fieldPath": "loads.0.currentA",
        "evidence": "user-supplied",
        "value": 1,
        "unit": "A"
      }
    ],
    "checklist": [
      "confirm_revision",
      "confirm_polarity",
      "measure_rails",
      "single_servo",
      "scan_ids",
      "support_robot"
    ]
  }
}

What this case does not establish

  • All supplied limits, efficiency, load and polarity confirmation are example declarations; this is one servo branch, not a verified complete arm.
  • A component rating is not an assembled-path rating. No physical safety or runtime has been verified.

Reference prepared:

Specification sources

The links below retain the technical sources’ original titles. Read each version and review date with the case assumptions.

Continuous overload remains blocked

Does a 5 A declaration cover six active C018 servos?

Version baseline: Microduck electrical rules 2026-11-12.2 · Robot profile SO-101 follower / LeRobot 0.7.0 · C018 current specification A/0 2023-07-20, 12 V test point

Inputs and steps

Use the official 12 V current point, six servos, six active, and synthetic 5 A source/path declarations.

  1. Calculate continuous demand: 6 × 0.9 = 5.4 A.
  2. Keep all-stall separate: 16.2 A nominal, 17.82 A with +10%.
  3. Review the adjusted input with only two declared active servos.

Reference check result

Cannot use this configuration

The declared continuous scenario is blocked because 5.4 A exceeds 5 A. Stall excess is a separate review risk.

Inspect inputs and reference JSON
{
  "inputs": {
    "profileId": "so101-follower-v0.7.0",
    "supply": {
      "minV": 12,
      "maxV": 12,
      "continuousA": 5,
      "capacityMah": null,
      "nominalV": null,
      "chemistry": "external-dc",
      "polarityConfirmed": true
    },
    "paths": [
      {
        "id": "servo",
        "label": "12 V adapter and harness",
        "parentId": null,
        "mode": "pass",
        "componentIds": [
          "waveshare-adapter-a"
        ],
        "limitA": 5,
        "limitSource": "Synthetic user declaration for this case: 5 A source and path; not a measured harness rating.",
        "assembledVerified": false
      }
    ],
    "motors": [
      {
        "componentId": "sts3215-c018",
        "pathId": "servo",
        "count": 6,
        "activeCount": 6,
        "performanceV": 12
      }
    ],
    "loads": []
  },
  "status": "blocked",
  "findings": [
    {
      "code": "continuous_over_limit",
      "severity": "blocked",
      "fieldPath": "paths.servo",
      "messageKey": "continuous_over_limit",
      "details": {
        "scenario": "rated",
        "current": 5.4,
        "limit": 5,
        "path": "12 V adapter and harness"
      },
      "sourceRef": null
    },
    {
      "code": "stall_over_limit",
      "severity": "needs_review",
      "fieldPath": "paths.servo",
      "messageKey": "stall_over_limit",
      "details": {
        "scenario": "stall",
        "current": 17.82,
        "limit": 5,
        "path": "12 V adapter and harness"
      },
      "sourceRef": null
    },
    {
      "code": "continuous_over_limit",
      "severity": "blocked",
      "fieldPath": "supply.continuousA",
      "messageKey": "continuous_over_limit",
      "details": {
        "scenario": "rated",
        "current": 5.4,
        "limit": 5,
        "path": "supply"
      },
      "sourceRef": null
    },
    {
      "code": "stall_over_limit",
      "severity": "needs_review",
      "fieldPath": "supply.continuousA",
      "messageKey": "stall_over_limit",
      "details": {
        "scenario": "stall",
        "current": 17.82,
        "limit": 5,
        "path": "supply"
      },
      "sourceRef": null
    }
  ],
  "outputs": {
    "scenarios": {
      "idle": {
        "complete": true,
        "knownSubtotalA": 0.18,
        "totalA": 0.18,
        "upperA": 0.18,
        "paths": [
          {
            "id": "servo",
            "complete": true,
            "knownSubtotalA": 0.18,
            "totalA": 0.18,
            "upperA": 0.18
          }
        ]
      },
      "rated": {
        "complete": true,
        "knownSubtotalA": 5.4,
        "totalA": 5.4,
        "upperA": 5.4,
        "paths": [
          {
            "id": "servo",
            "complete": true,
            "knownSubtotalA": 5.4,
            "totalA": 5.4,
            "upperA": 5.4
          }
        ]
      },
      "stall": {
        "complete": true,
        "knownSubtotalA": 16.200000000000003,
        "totalA": 16.200000000000003,
        "upperA": 17.820000000000004,
        "paths": [
          {
            "id": "servo",
            "complete": true,
            "knownSubtotalA": 16.200000000000003,
            "totalA": 16.200000000000003,
            "upperA": 17.820000000000004
          }
        ]
      }
    },
    "paths": [
      {
        "id": "servo",
        "label": "12 V adapter and harness",
        "parentId": null,
        "voltage": {
          "minV": 12,
          "maxV": 12
        },
        "knownComponentLimitA": 5,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 0.18,
            "totalA": 0.18,
            "upperA": 0.18
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 5.4,
            "totalA": 5.4,
            "upperA": 5.4
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 16.200000000000003,
            "totalA": 16.200000000000003,
            "upperA": 17.820000000000004
          }
        }
      }
    ],
    "bom": [
      [
        "role",
        "path",
        "component",
        "quantity",
        "productId",
        "variantId",
        "sourceRefs",
        "verification"
      ],
      [
        "servo",
        "servo",
        "Feetech STS3215-C018",
        6,
        "lerobot-sts3215",
        "sts3215-c018",
        "c018-a0",
        "offline-configuration; hardware unverified"
      ],
      [
        "path component",
        "servo",
        "Waveshare Bus Servo Adapter (A)",
        1,
        "lerobot-bus-adapter",
        "waveshare-bus-adapter-a",
        "waveshare-faq",
        "component rating only; assembled path unverified"
      ]
    ],
    "runtimeHours": null,
    "assumptions": [
      {
        "fieldPath": "paths.servo.limitA",
        "value": 5,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration for this case: 5 A source and path; not a measured harness rating."
      }
    ],
    "checklist": [
      "confirm_revision",
      "confirm_polarity",
      "measure_rails",
      "single_servo",
      "scan_ids",
      "support_robot"
    ]
  }
}

Adjust and check again

Two active plus four idle gives 1.92 A, but all-stall remains 16.2 A / 17.82 A upper. The adjusted report still needs review.

Needs review

Inspect the adjusted reference JSON
{
  "inputs": {
    "profileId": "so101-follower-v0.7.0",
    "supply": {
      "minV": 12,
      "maxV": 12,
      "continuousA": 5,
      "capacityMah": null,
      "nominalV": null,
      "chemistry": "external-dc",
      "polarityConfirmed": true
    },
    "paths": [
      {
        "id": "servo",
        "label": "12 V adapter and harness",
        "parentId": null,
        "mode": "pass",
        "componentIds": [
          "waveshare-adapter-a"
        ],
        "limitA": 5,
        "limitSource": "Synthetic user declaration for this case: 5 A source and path; not a measured harness rating.",
        "assembledVerified": false
      }
    ],
    "motors": [
      {
        "componentId": "sts3215-c018",
        "pathId": "servo",
        "count": 6,
        "activeCount": 2,
        "performanceV": 12
      }
    ],
    "loads": []
  },
  "status": "needs_review",
  "findings": [
    {
      "code": "stall_over_limit",
      "severity": "needs_review",
      "fieldPath": "paths.servo",
      "messageKey": "stall_over_limit",
      "details": {
        "scenario": "stall",
        "current": 17.82,
        "limit": 5,
        "path": "12 V adapter and harness"
      },
      "sourceRef": null
    },
    {
      "code": "stall_over_limit",
      "severity": "needs_review",
      "fieldPath": "supply.continuousA",
      "messageKey": "stall_over_limit",
      "details": {
        "scenario": "stall",
        "current": 17.82,
        "limit": 5,
        "path": "supply"
      },
      "sourceRef": null
    }
  ],
  "outputs": {
    "scenarios": {
      "idle": {
        "complete": true,
        "knownSubtotalA": 0.18,
        "totalA": 0.18,
        "upperA": 0.18,
        "paths": [
          {
            "id": "servo",
            "complete": true,
            "knownSubtotalA": 0.18,
            "totalA": 0.18,
            "upperA": 0.18
          }
        ]
      },
      "rated": {
        "complete": true,
        "knownSubtotalA": 1.92,
        "totalA": 1.92,
        "upperA": 1.92,
        "paths": [
          {
            "id": "servo",
            "complete": true,
            "knownSubtotalA": 1.92,
            "totalA": 1.92,
            "upperA": 1.92
          }
        ]
      },
      "stall": {
        "complete": true,
        "knownSubtotalA": 16.200000000000003,
        "totalA": 16.200000000000003,
        "upperA": 17.820000000000004,
        "paths": [
          {
            "id": "servo",
            "complete": true,
            "knownSubtotalA": 16.200000000000003,
            "totalA": 16.200000000000003,
            "upperA": 17.820000000000004
          }
        ]
      }
    },
    "paths": [
      {
        "id": "servo",
        "label": "12 V adapter and harness",
        "parentId": null,
        "voltage": {
          "minV": 12,
          "maxV": 12
        },
        "knownComponentLimitA": 5,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 0.18,
            "totalA": 0.18,
            "upperA": 0.18
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 1.92,
            "totalA": 1.92,
            "upperA": 1.92
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 16.200000000000003,
            "totalA": 16.200000000000003,
            "upperA": 17.820000000000004
          }
        }
      }
    ],
    "bom": [
      [
        "role",
        "path",
        "component",
        "quantity",
        "productId",
        "variantId",
        "sourceRefs",
        "verification"
      ],
      [
        "servo",
        "servo",
        "Feetech STS3215-C018",
        6,
        "lerobot-sts3215",
        "sts3215-c018",
        "c018-a0",
        "offline-configuration; hardware unverified"
      ],
      [
        "path component",
        "servo",
        "Waveshare Bus Servo Adapter (A)",
        1,
        "lerobot-bus-adapter",
        "waveshare-bus-adapter-a",
        "waveshare-faq",
        "component rating only; assembled path unverified"
      ]
    ],
    "runtimeHours": null,
    "assumptions": [
      {
        "fieldPath": "paths.servo.limitA",
        "value": 5,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration for this case: 5 A source and path; not a measured harness rating."
      }
    ],
    "checklist": [
      "confirm_revision",
      "confirm_polarity",
      "measure_rails",
      "single_servo",
      "scan_ids",
      "support_robot"
    ]
  }
}

What this case does not establish

  • A declared active count does not enforce concurrency or limit current.
  • The adapter’s 5 A maximum is not an automatic limiter or proof of harness capacity.

Reference prepared:

Specification sources

The links below retain the technical sources’ original titles. Read each version and review date with the case assumptions.

A known subtotal is not a total

Can the 12 V current point be reused at 8.4 V?

Version baseline: Microduck electrical rules 2026-11-12.2 · Robot profile SO-101 follower / LeRobot 0.7.0 · C018 current specification A/0 2023-07-20, 12 V test point

Inputs and steps

Declare 8.4 V, six C018 servos with two active, a 5 V converter at efficiency 0.8, and a synthetic 1 A board load; source/path limits are 5 A.

  1. Check operating range separately from the current test point.
  2. Keep C018 current unknown at 8.4 V; do not interpolate.
  3. Count only the known logic contribution: 5 × 1 / (8.4 × 0.8).

Reference check result

Needs review

About 0.744048 A is a known source subtotal only. Servo demand, totals, upper bounds and runtime remain unknown.

Inspect inputs and reference JSON
{
  "inputs": {
    "profileId": "so101-follower-v0.7.0",
    "supply": {
      "minV": 8.4,
      "maxV": 8.4,
      "continuousA": 5,
      "capacityMah": null,
      "nominalV": null,
      "chemistry": "external-dc",
      "polarityConfirmed": true
    },
    "paths": [
      {
        "id": "source",
        "label": "Declared 8.4 V source and servo branch",
        "parentId": null,
        "mode": "pass",
        "componentIds": [
          "waveshare-adapter-a"
        ],
        "limitA": 5,
        "limitSource": "Synthetic user declaration: 5 A source/path; no assembled-path test.",
        "assembledVerified": false
      },
      {
        "id": "logic",
        "label": "Declared 5 V converter output",
        "parentId": "source",
        "mode": "regulated",
        "componentIds": [],
        "outputMinV": 5,
        "outputMaxV": 5,
        "efficiency": 0.8,
        "limitA": 2,
        "limitSource": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified.",
        "assembledVerified": false
      }
    ],
    "motors": [
      {
        "componentId": "sts3215-c018",
        "pathId": "source",
        "count": 6,
        "activeCount": 2,
        "performanceV": 8.4
      }
    ],
    "loads": [
      {
        "id": "uno-q",
        "componentId": "uno-q",
        "pathId": "logic",
        "port": "usb",
        "count": 1,
        "currentA": 1
      }
    ]
  },
  "status": "needs_review",
  "findings": [
    {
      "code": "current_unknown",
      "severity": "needs_review",
      "fieldPath": "motors.0",
      "messageKey": "current_unknown",
      "details": {
        "component": "Feetech STS3215-C018",
        "voltage": 8.4
      },
      "sourceRef": "c018-a0"
    }
  ],
  "outputs": {
    "scenarios": {
      "idle": {
        "complete": false,
        "knownSubtotalA": 0.744047619047619,
        "totalA": null,
        "upperA": null,
        "paths": [
          {
            "id": "source",
            "complete": false,
            "knownSubtotalA": 0.744047619047619,
            "totalA": null,
            "upperA": null
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      },
      "rated": {
        "complete": false,
        "knownSubtotalA": 0.744047619047619,
        "totalA": null,
        "upperA": null,
        "paths": [
          {
            "id": "source",
            "complete": false,
            "knownSubtotalA": 0.744047619047619,
            "totalA": null,
            "upperA": null
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      },
      "stall": {
        "complete": false,
        "knownSubtotalA": 0.744047619047619,
        "totalA": null,
        "upperA": null,
        "paths": [
          {
            "id": "source",
            "complete": false,
            "knownSubtotalA": 0.744047619047619,
            "totalA": null,
            "upperA": null
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      }
    },
    "paths": [
      {
        "id": "source",
        "label": "Declared 8.4 V source and servo branch",
        "parentId": null,
        "voltage": {
          "minV": 8.4,
          "maxV": 8.4
        },
        "knownComponentLimitA": 5,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": false,
            "knownSubtotalA": 0.744047619047619,
            "totalA": null,
            "upperA": null
          },
          "rated": {
            "complete": false,
            "knownSubtotalA": 0.744047619047619,
            "totalA": null,
            "upperA": null
          },
          "stall": {
            "complete": false,
            "knownSubtotalA": 0.744047619047619,
            "totalA": null,
            "upperA": null
          }
        }
      },
      {
        "id": "logic",
        "label": "Declared 5 V converter output",
        "parentId": "source",
        "voltage": {
          "minV": 5,
          "maxV": 5
        },
        "knownComponentLimitA": 2,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        }
      }
    ],
    "bom": [
      [
        "role",
        "path",
        "component",
        "quantity",
        "productId",
        "variantId",
        "sourceRefs",
        "verification"
      ],
      [
        "servo",
        "source",
        "Feetech STS3215-C018",
        6,
        "lerobot-sts3215",
        "sts3215-c018",
        "c018-a0",
        "offline-configuration; hardware unverified"
      ],
      [
        "path component",
        "source",
        "Waveshare Bus Servo Adapter (A)",
        1,
        "lerobot-bus-adapter",
        "waveshare-bus-adapter-a",
        "waveshare-faq",
        "component rating only; assembled path unverified"
      ],
      [
        "logic load",
        "logic",
        "Arduino UNO Q",
        1,
        "uno-q-2gb",
        "abx00162",
        "unoq-r16;luwu-v11",
        "declared load; hardware unverified"
      ]
    ],
    "runtimeHours": null,
    "assumptions": [
      {
        "fieldPath": "paths.source.limitA",
        "value": 5,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration: 5 A source/path; no assembled-path test."
      },
      {
        "fieldPath": "paths.logic.limitA",
        "value": 2,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified."
      },
      {
        "fieldPath": "loads.0.currentA",
        "evidence": "user-supplied",
        "value": 1,
        "unit": "A"
      }
    ],
    "checklist": [
      "confirm_revision",
      "confirm_polarity",
      "measure_rails",
      "single_servo",
      "scan_ids",
      "support_robot"
    ]
  }
}

Adjust and check again

At the separate 12 V point, rated source demand is about 2.440833 A. Stall upper demand is 18.340833 A, so the adjusted report still needs review.

Needs review

Inspect the adjusted reference JSON
{
  "inputs": {
    "profileId": "so101-follower-v0.7.0",
    "supply": {
      "minV": 12,
      "maxV": 12,
      "continuousA": 5,
      "capacityMah": null,
      "nominalV": null,
      "chemistry": "external-dc",
      "polarityConfirmed": true
    },
    "paths": [
      {
        "id": "source",
        "label": "Declared 12 V source and servo branch",
        "parentId": null,
        "mode": "pass",
        "componentIds": [
          "waveshare-adapter-a"
        ],
        "limitA": 5,
        "limitSource": "Synthetic user declaration: 5 A source/path; no assembled-path test.",
        "assembledVerified": false
      },
      {
        "id": "logic",
        "label": "Declared 5 V converter output",
        "parentId": "source",
        "mode": "regulated",
        "componentIds": [],
        "outputMinV": 5,
        "outputMaxV": 5,
        "efficiency": 0.8,
        "limitA": 2,
        "limitSource": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified.",
        "assembledVerified": false
      }
    ],
    "motors": [
      {
        "componentId": "sts3215-c018",
        "pathId": "source",
        "count": 6,
        "activeCount": 2,
        "performanceV": 12
      }
    ],
    "loads": [
      {
        "id": "uno-q",
        "componentId": "uno-q",
        "pathId": "logic",
        "port": "usb",
        "count": 1,
        "currentA": 1
      }
    ]
  },
  "status": "needs_review",
  "findings": [
    {
      "code": "stall_over_limit",
      "severity": "needs_review",
      "fieldPath": "paths.source",
      "messageKey": "stall_over_limit",
      "details": {
        "scenario": "stall",
        "current": 18.341,
        "limit": 5,
        "path": "Declared 12 V source and servo branch"
      },
      "sourceRef": null
    },
    {
      "code": "stall_over_limit",
      "severity": "needs_review",
      "fieldPath": "supply.continuousA",
      "messageKey": "stall_over_limit",
      "details": {
        "scenario": "stall",
        "current": 18.341,
        "limit": 5,
        "path": "supply"
      },
      "sourceRef": null
    }
  ],
  "outputs": {
    "scenarios": {
      "idle": {
        "complete": true,
        "knownSubtotalA": 0.7008333333333334,
        "totalA": 0.7008333333333334,
        "upperA": 0.7008333333333334,
        "paths": [
          {
            "id": "source",
            "complete": true,
            "knownSubtotalA": 0.7008333333333334,
            "totalA": 0.7008333333333334,
            "upperA": 0.7008333333333334
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      },
      "rated": {
        "complete": true,
        "knownSubtotalA": 2.4408333333333334,
        "totalA": 2.4408333333333334,
        "upperA": 2.4408333333333334,
        "paths": [
          {
            "id": "source",
            "complete": true,
            "knownSubtotalA": 2.4408333333333334,
            "totalA": 2.4408333333333334,
            "upperA": 2.4408333333333334
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      },
      "stall": {
        "complete": true,
        "knownSubtotalA": 16.720833333333335,
        "totalA": 16.720833333333335,
        "upperA": 18.340833333333336,
        "paths": [
          {
            "id": "source",
            "complete": true,
            "knownSubtotalA": 16.720833333333335,
            "totalA": 16.720833333333335,
            "upperA": 18.340833333333336
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      }
    },
    "paths": [
      {
        "id": "source",
        "label": "Declared 12 V source and servo branch",
        "parentId": null,
        "voltage": {
          "minV": 12,
          "maxV": 12
        },
        "knownComponentLimitA": 5,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 0.7008333333333334,
            "totalA": 0.7008333333333334,
            "upperA": 0.7008333333333334
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 2.4408333333333334,
            "totalA": 2.4408333333333334,
            "upperA": 2.4408333333333334
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 16.720833333333335,
            "totalA": 16.720833333333335,
            "upperA": 18.340833333333336
          }
        }
      },
      {
        "id": "logic",
        "label": "Declared 5 V converter output",
        "parentId": "source",
        "voltage": {
          "minV": 5,
          "maxV": 5
        },
        "knownComponentLimitA": 2,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        }
      }
    ],
    "bom": [
      [
        "role",
        "path",
        "component",
        "quantity",
        "productId",
        "variantId",
        "sourceRefs",
        "verification"
      ],
      [
        "servo",
        "source",
        "Feetech STS3215-C018",
        6,
        "lerobot-sts3215",
        "sts3215-c018",
        "c018-a0",
        "offline-configuration; hardware unverified"
      ],
      [
        "path component",
        "source",
        "Waveshare Bus Servo Adapter (A)",
        1,
        "lerobot-bus-adapter",
        "waveshare-bus-adapter-a",
        "waveshare-faq",
        "component rating only; assembled path unverified"
      ],
      [
        "logic load",
        "logic",
        "Arduino UNO Q",
        1,
        "uno-q-2gb",
        "abx00162",
        "unoq-r16;luwu-v11",
        "declared load; hardware unverified"
      ]
    ],
    "runtimeHours": null,
    "assumptions": [
      {
        "fieldPath": "paths.source.limitA",
        "value": 5,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration: 5 A source/path; no assembled-path test."
      },
      {
        "fieldPath": "paths.logic.limitA",
        "value": 2,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified."
      },
      {
        "fieldPath": "loads.0.currentA",
        "evidence": "user-supplied",
        "value": 1,
        "unit": "A"
      }
    ],
    "checklist": [
      "confirm_revision",
      "confirm_polarity",
      "measure_rails",
      "single_servo",
      "scan_ids",
      "support_robot"
    ]
  }
}

What this case does not establish

  • Changing the design to 12 V is a new declared scenario, not evidence about 8.4 V.
  • This C018 case does not resolve the separate C001 minimum-voltage conflict at 5 V.

Reference prepared:

Specification sources

The links below retain the technical sources’ original titles. Read each version and review date with the case assumptions.

Contact us