Strompfade und Stückliste prüfen
Vergleichen Sie deklarierte Stromversorgung und bekannte Bauteildaten. Quellspannung, Wandlerausgang und Strom-Spezifikationspunkt bleiben getrennt.
Robotervoreinstellungen
- SO-101 leader
- SO-101 follower
- Microduck UNO Q / V1.1
Spannung und Strom belegen
Minimale und maximale Spannung in V, Stromgrenzen in A angeben. Servoanzahl, gleichzeitig aktive Servos und Testspannung der Stromdaten eintragen. Eigene Motorstromwerte brauchen eine Mess- oder Quellenangabe; unbekannte Daten bleiben offen.
Rechenbeispiel nur für die Servos: Wählen Sie sechs STS3215-C018 am dokumentierten 12-V-Punkt und deklarieren Sie zwei gleichzeitig aktive Servos. Mit 0,03 A Leerlaufstrom, 0,9 A Nennstrom und 2,7 A nominalem Blockierstrom je Servo ergeben sich 6 × 0,03 = 0,18 A im Leerlauf, 2 × 0,9 + 4 × 0,03 = 1,92 A für die deklarierte Dauerlast und 6 × 2,7 = 16,2 A nominal beim Blockieren aller sechs Servos. Die Rechnung beschreibt diesen eingegebenen Lastfall, nicht den Strom jeder beliebigen Bewegung.
Den Versorgungsweg prüfen
- Voreinstellung wählen und Quelle, Wandler, Controller sowie Servoäste und tatsächlichen Eingangsport samt Polarität prüfen.
- Bekannte Gesamtpfadgrenzen mit Beleg angeben; bei Wandlern Ausgangsspannung und bekannte Effizienz ergänzen.
- Leerlauf, deklarierte Dauerlast und Blockieren aller Servos getrennt betrachten und die Einschalt-Checkliste lesen.
Projektunterlagen
Projekt und JSON-Bericht speichern oder BOM-CSV mit Produkt-/Variantenreferenzen exportieren. Ein bekannter Teilbetrag ist keine vollständige Last. Zubehörlinks bestellen nichts und ändern keine Preise.
Grenzen der Abschätzung
Stromwerte gelten am genannten Spannungspunkt; es wird nicht interpoliert. Dauerlastüberschreitung blockiert das Szenario, Blockierstromüberschreitung weist auf Risiken hin. Stecker- und Sicherungswerte zertifizieren keinen gesamten Strompfad. Akkukapazität allein belegt weder Laufzeit noch physische Sicherheit.
Berücksichtigen Sie zusätzlich die im Datenpunkt hinterlegte Blockierstromtoleranz: 10 % ergeben hier 17,82 A als obere Abschätzung. Eine mit 5 A deklarierte Quelle liegt damit oberhalb des reinen Dauerlast-Teilbetrags und unterhalb des Blockierszenarios. Controller, zusätzliche Verbraucher und Wandlerverluste sind in diesen Servo-Teilbeträgen noch nicht enthalten. Ergänzen Sie deren belegte Werte sowie die tatsächlich montierten Strompfade. Ein unbekannter Verbraucher oder eine ungeprüfte Leitung bleibt prüfbedürftig; aus dem Rechenbeispiel folgt keine Freigabe der Versorgung.
Versorgungspfade vollständig durchrechnen
Drei Offline-Beispiele führen von deklarierten Eingaben zum Bericht. Quelle, Wandler, Leitungsgrenzen und Platinenlast sind synthetische Nutzerangaben, keine Messwerte. Servoströme gelten nur am genannten Spannungspunkt.
Offline-Prüfungen bestätigen weder reale Hardware noch Sicherheit. Diese synthetischen Referenzbeispiele gehören nicht zu den oben eingestellten Werten. Importieren Sie ein Beispiel, um seine Eingaben neu zu prüfen; gespeicherte Urteile werden nicht übernommen.
Ein Wandler verändert den Quellenstrom
Darf eine 5-V-Last direkt zum 12-V-Servostrom addiert werden?
Versionsstand: Microduck electrical rules 2026-11-12.2 · Robot profile SO-101 follower / LeRobot 0.7.0 · C018 current specification A/0 2023-07-20, 12 V test point
Eingaben und Vorgehen
Deklariert sind 12 V / 4 A, ein C018 am 12-V-Prüfpunkt, ein 5-V-Wandler mit Wirkungsgrad 0.8, eine 2-A-Ausgangsgrenze und 1 A an UNO Q USB.
- Servozweig bei 12 V und Logikzweig bei 5 V getrennt halten.
- Logiklast auf die Quelle umrechnen: 5 × 1 / (12 × 0.8).
- Diesen Eingangsstrom je Szenario addieren und jede Pfadgrenze auf ihrer Spannungsebene vergleichen.
Referenzergebnis der Prüfung
Kein bekannter Konfigurationskonflikt
An der Quelle ergeben sich ungefähr 0.550833 / 1.420833 / 3.220833 A für Leerlauf/Nennlast/Blockieren. Die obere Stromabschätzung für den Blockierfall mit +10% beträgt 3.490833 A; zur deklarierten 4-A-Grenze besteht kein bekannter Konflikt.
Eingaben und Referenz-JSON ansehen
{
"inputs": {
"profileId": "so101-follower-v0.7.0",
"supply": {
"minV": 12,
"maxV": 12,
"continuousA": 4,
"capacityMah": null,
"nominalV": null,
"chemistry": "external-dc",
"polarityConfirmed": true
},
"paths": [
{
"id": "source",
"label": "12 V source and servo branch",
"parentId": null,
"mode": "pass",
"componentIds": [
"waveshare-adapter-a"
],
"limitA": 4,
"limitSource": "Synthetic user declaration for this reference case: 4 A assembled-path limit; not a measurement.",
"assembledVerified": false
},
{
"id": "logic",
"label": "Declared 5 V converter output",
"parentId": "source",
"mode": "regulated",
"componentIds": [],
"outputMinV": 5,
"outputMaxV": 5,
"efficiency": 0.8,
"limitA": 2,
"limitSource": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified.",
"assembledVerified": false
}
],
"motors": [
{
"componentId": "sts3215-c018",
"pathId": "source",
"count": 1,
"activeCount": 1,
"performanceV": 12
}
],
"loads": [
{
"id": "uno-q",
"componentId": "uno-q",
"pathId": "logic",
"port": "usb",
"count": 1,
"currentA": 1
}
]
},
"status": "no_known_conflict",
"findings": [],
"outputs": {
"scenarios": {
"idle": {
"complete": true,
"knownSubtotalA": 0.5508333333333334,
"totalA": 0.5508333333333334,
"upperA": 0.5508333333333334,
"paths": [
{
"id": "source",
"complete": true,
"knownSubtotalA": 0.5508333333333334,
"totalA": 0.5508333333333334,
"upperA": 0.5508333333333334
},
{
"id": "logic",
"complete": true,
"knownSubtotalA": 1,
"totalA": 1,
"upperA": 1
}
]
},
"rated": {
"complete": true,
"knownSubtotalA": 1.4208333333333334,
"totalA": 1.4208333333333334,
"upperA": 1.4208333333333334,
"paths": [
{
"id": "source",
"complete": true,
"knownSubtotalA": 1.4208333333333334,
"totalA": 1.4208333333333334,
"upperA": 1.4208333333333334
},
{
"id": "logic",
"complete": true,
"knownSubtotalA": 1,
"totalA": 1,
"upperA": 1
}
]
},
"stall": {
"complete": true,
"knownSubtotalA": 3.2208333333333337,
"totalA": 3.2208333333333337,
"upperA": 3.490833333333334,
"paths": [
{
"id": "source",
"complete": true,
"knownSubtotalA": 3.2208333333333337,
"totalA": 3.2208333333333337,
"upperA": 3.490833333333334
},
{
"id": "logic",
"complete": true,
"knownSubtotalA": 1,
"totalA": 1,
"upperA": 1
}
]
}
},
"paths": [
{
"id": "source",
"label": "12 V source and servo branch",
"parentId": null,
"voltage": {
"minV": 12,
"maxV": 12
},
"knownComponentLimitA": 4,
"assembledPathVerified": false,
"scenarios": {
"idle": {
"complete": true,
"knownSubtotalA": 0.5508333333333334,
"totalA": 0.5508333333333334,
"upperA": 0.5508333333333334
},
"rated": {
"complete": true,
"knownSubtotalA": 1.4208333333333334,
"totalA": 1.4208333333333334,
"upperA": 1.4208333333333334
},
"stall": {
"complete": true,
"knownSubtotalA": 3.2208333333333337,
"totalA": 3.2208333333333337,
"upperA": 3.490833333333334
}
}
},
{
"id": "logic",
"label": "Declared 5 V converter output",
"parentId": "source",
"voltage": {
"minV": 5,
"maxV": 5
},
"knownComponentLimitA": 2,
"assembledPathVerified": false,
"scenarios": {
"idle": {
"complete": true,
"knownSubtotalA": 1,
"totalA": 1,
"upperA": 1
},
"rated": {
"complete": true,
"knownSubtotalA": 1,
"totalA": 1,
"upperA": 1
},
"stall": {
"complete": true,
"knownSubtotalA": 1,
"totalA": 1,
"upperA": 1
}
}
}
],
"bom": [
[
"role",
"path",
"component",
"quantity",
"productId",
"variantId",
"sourceRefs",
"verification"
],
[
"servo",
"source",
"Feetech STS3215-C018",
1,
"lerobot-sts3215",
"sts3215-c018",
"c018-a0",
"offline-configuration; hardware unverified"
],
[
"path component",
"source",
"Waveshare Bus Servo Adapter (A)",
1,
"lerobot-bus-adapter",
"waveshare-bus-adapter-a",
"waveshare-faq",
"component rating only; assembled path unverified"
],
[
"logic load",
"logic",
"Arduino UNO Q",
1,
"uno-q-2gb",
"abx00162",
"unoq-r16;luwu-v11",
"declared load; hardware unverified"
]
],
"runtimeHours": null,
"assumptions": [
{
"fieldPath": "paths.source.limitA",
"value": 4,
"unit": "A",
"evidence": "user-supplied",
"note": "Synthetic user declaration for this reference case: 4 A assembled-path limit; not a measurement."
},
{
"fieldPath": "paths.logic.limitA",
"value": 2,
"unit": "A",
"evidence": "user-supplied",
"note": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified."
},
{
"fieldPath": "loads.0.currentA",
"evidence": "user-supplied",
"value": 1,
"unit": "A"
}
],
"checklist": [
"confirm_revision",
"confirm_polarity",
"measure_rails",
"single_servo",
"scan_ids",
"support_robot"
]
}
}
Was dieses Beispiel nicht nachweist
- Grenzen, Wirkungsgrad, Last und bestätigte Polarität sind Beispieldaten; geprüft wird ein Servozweig, kein vollständiger Arm.
- Eine Bauteilgrenze bestätigt keinen aufgebauten Strompfad. Sicherheit und Laufzeit sind nicht praktisch nachgewiesen.
Referenz erstellt am:
Spezifikationsquellen
Die folgenden Links tragen die Originaltitel der technischen Quellen. Beachten Sie den Versionsstand, das Prüfdatum und die Annahmen des Beispiels.
- Feetech ST-3215-C018 A/0A/0 2023-07-20, electrical specification p3 · geprüft am
- Waveshare Bus Servo Adapter (A) FAQhardware revision not stated · geprüft am
- Arduino UNO Q datasheetRevision 16, 2026-10-30 · geprüft am
- LeRobot SO-101 setup guideLeRobot v0.7.0 / 410c095eacc0011d998a73383eb94abed2715af0 · geprüft am
- Luwu V1.1 PCBA component purchasing BOMedeb42f690907663e0ac2babf7bb858df380a300; component-level procurement ratings · geprüft am
Dauerüberlast bleibt gesperrt
Reicht eine deklarierte 5-A-Versorgung für sechs aktive C018?
Versionsstand: Microduck electrical rules 2026-11-12.2 · Robot profile SO-101 follower / LeRobot 0.7.0 · C018 current specification A/0 2023-07-20, 12 V test point
Eingaben und Vorgehen
Sechs Servos, sechs aktiv, offizieller 12-V-Strompunkt sowie synthetische 5-A-Grenzen für Quelle und Pfad.
- Dauerbedarf berechnen: 6 × 0.9 = 5.4 A.
- Blockieren getrennt betrachten: 16.2 A nominal, 17.82 A mit +10%.
- Die angepasste Eingabe mit nur zwei deklarierten aktiven Servos erneut prüfen.
Referenzergebnis der Prüfung
Konfiguration nicht verwendbar
5.4 A überschreiten 5 A; das deklarierte Dauerszenario wird gesperrt. Der Blockierfall bleibt ein eigenes Prüfrisiko.
Eingaben und Referenz-JSON ansehen
{
"inputs": {
"profileId": "so101-follower-v0.7.0",
"supply": {
"minV": 12,
"maxV": 12,
"continuousA": 5,
"capacityMah": null,
"nominalV": null,
"chemistry": "external-dc",
"polarityConfirmed": true
},
"paths": [
{
"id": "servo",
"label": "12 V adapter and harness",
"parentId": null,
"mode": "pass",
"componentIds": [
"waveshare-adapter-a"
],
"limitA": 5,
"limitSource": "Synthetic user declaration for this case: 5 A source and path; not a measured harness rating.",
"assembledVerified": false
}
],
"motors": [
{
"componentId": "sts3215-c018",
"pathId": "servo",
"count": 6,
"activeCount": 6,
"performanceV": 12
}
],
"loads": []
},
"status": "blocked",
"findings": [
{
"code": "continuous_over_limit",
"severity": "blocked",
"fieldPath": "paths.servo",
"messageKey": "continuous_over_limit",
"details": {
"scenario": "rated",
"current": 5.4,
"limit": 5,
"path": "12 V adapter and harness"
},
"sourceRef": null
},
{
"code": "stall_over_limit",
"severity": "needs_review",
"fieldPath": "paths.servo",
"messageKey": "stall_over_limit",
"details": {
"scenario": "stall",
"current": 17.82,
"limit": 5,
"path": "12 V adapter and harness"
},
"sourceRef": null
},
{
"code": "continuous_over_limit",
"severity": "blocked",
"fieldPath": "supply.continuousA",
"messageKey": "continuous_over_limit",
"details": {
"scenario": "rated",
"current": 5.4,
"limit": 5,
"path": "supply"
},
"sourceRef": null
},
{
"code": "stall_over_limit",
"severity": "needs_review",
"fieldPath": "supply.continuousA",
"messageKey": "stall_over_limit",
"details": {
"scenario": "stall",
"current": 17.82,
"limit": 5,
"path": "supply"
},
"sourceRef": null
}
],
"outputs": {
"scenarios": {
"idle": {
"complete": true,
"knownSubtotalA": 0.18,
"totalA": 0.18,
"upperA": 0.18,
"paths": [
{
"id": "servo",
"complete": true,
"knownSubtotalA": 0.18,
"totalA": 0.18,
"upperA": 0.18
}
]
},
"rated": {
"complete": true,
"knownSubtotalA": 5.4,
"totalA": 5.4,
"upperA": 5.4,
"paths": [
{
"id": "servo",
"complete": true,
"knownSubtotalA": 5.4,
"totalA": 5.4,
"upperA": 5.4
}
]
},
"stall": {
"complete": true,
"knownSubtotalA": 16.200000000000003,
"totalA": 16.200000000000003,
"upperA": 17.820000000000004,
"paths": [
{
"id": "servo",
"complete": true,
"knownSubtotalA": 16.200000000000003,
"totalA": 16.200000000000003,
"upperA": 17.820000000000004
}
]
}
},
"paths": [
{
"id": "servo",
"label": "12 V adapter and harness",
"parentId": null,
"voltage": {
"minV": 12,
"maxV": 12
},
"knownComponentLimitA": 5,
"assembledPathVerified": false,
"scenarios": {
"idle": {
"complete": true,
"knownSubtotalA": 0.18,
"totalA": 0.18,
"upperA": 0.18
},
"rated": {
"complete": true,
"knownSubtotalA": 5.4,
"totalA": 5.4,
"upperA": 5.4
},
"stall": {
"complete": true,
"knownSubtotalA": 16.200000000000003,
"totalA": 16.200000000000003,
"upperA": 17.820000000000004
}
}
}
],
"bom": [
[
"role",
"path",
"component",
"quantity",
"productId",
"variantId",
"sourceRefs",
"verification"
],
[
"servo",
"servo",
"Feetech STS3215-C018",
6,
"lerobot-sts3215",
"sts3215-c018",
"c018-a0",
"offline-configuration; hardware unverified"
],
[
"path component",
"servo",
"Waveshare Bus Servo Adapter (A)",
1,
"lerobot-bus-adapter",
"waveshare-bus-adapter-a",
"waveshare-faq",
"component rating only; assembled path unverified"
]
],
"runtimeHours": null,
"assumptions": [
{
"fieldPath": "paths.servo.limitA",
"value": 5,
"unit": "A",
"evidence": "user-supplied",
"note": "Synthetic user declaration for this case: 5 A source and path; not a measured harness rating."
}
],
"checklist": [
"confirm_revision",
"confirm_polarity",
"measure_rails",
"single_servo",
"scan_ids",
"support_robot"
]
}
}
Anpassen und erneut prüfen
Zwei aktive und vier ruhende Servos benötigen 1.92 A. Der Blockierfall bleibt bei 16.2 A beziehungsweise 17.82 A oben; auch die Anpassung muss geprüft werden.
Prüfung erforderlich
Angepasste Referenz als JSON ansehen
{
"inputs": {
"profileId": "so101-follower-v0.7.0",
"supply": {
"minV": 12,
"maxV": 12,
"continuousA": 5,
"capacityMah": null,
"nominalV": null,
"chemistry": "external-dc",
"polarityConfirmed": true
},
"paths": [
{
"id": "servo",
"label": "12 V adapter and harness",
"parentId": null,
"mode": "pass",
"componentIds": [
"waveshare-adapter-a"
],
"limitA": 5,
"limitSource": "Synthetic user declaration for this case: 5 A source and path; not a measured harness rating.",
"assembledVerified": false
}
],
"motors": [
{
"componentId": "sts3215-c018",
"pathId": "servo",
"count": 6,
"activeCount": 2,
"performanceV": 12
}
],
"loads": []
},
"status": "needs_review",
"findings": [
{
"code": "stall_over_limit",
"severity": "needs_review",
"fieldPath": "paths.servo",
"messageKey": "stall_over_limit",
"details": {
"scenario": "stall",
"current": 17.82,
"limit": 5,
"path": "12 V adapter and harness"
},
"sourceRef": null
},
{
"code": "stall_over_limit",
"severity": "needs_review",
"fieldPath": "supply.continuousA",
"messageKey": "stall_over_limit",
"details": {
"scenario": "stall",
"current": 17.82,
"limit": 5,
"path": "supply"
},
"sourceRef": null
}
],
"outputs": {
"scenarios": {
"idle": {
"complete": true,
"knownSubtotalA": 0.18,
"totalA": 0.18,
"upperA": 0.18,
"paths": [
{
"id": "servo",
"complete": true,
"knownSubtotalA": 0.18,
"totalA": 0.18,
"upperA": 0.18
}
]
},
"rated": {
"complete": true,
"knownSubtotalA": 1.92,
"totalA": 1.92,
"upperA": 1.92,
"paths": [
{
"id": "servo",
"complete": true,
"knownSubtotalA": 1.92,
"totalA": 1.92,
"upperA": 1.92
}
]
},
"stall": {
"complete": true,
"knownSubtotalA": 16.200000000000003,
"totalA": 16.200000000000003,
"upperA": 17.820000000000004,
"paths": [
{
"id": "servo",
"complete": true,
"knownSubtotalA": 16.200000000000003,
"totalA": 16.200000000000003,
"upperA": 17.820000000000004
}
]
}
},
"paths": [
{
"id": "servo",
"label": "12 V adapter and harness",
"parentId": null,
"voltage": {
"minV": 12,
"maxV": 12
},
"knownComponentLimitA": 5,
"assembledPathVerified": false,
"scenarios": {
"idle": {
"complete": true,
"knownSubtotalA": 0.18,
"totalA": 0.18,
"upperA": 0.18
},
"rated": {
"complete": true,
"knownSubtotalA": 1.92,
"totalA": 1.92,
"upperA": 1.92
},
"stall": {
"complete": true,
"knownSubtotalA": 16.200000000000003,
"totalA": 16.200000000000003,
"upperA": 17.820000000000004
}
}
}
],
"bom": [
[
"role",
"path",
"component",
"quantity",
"productId",
"variantId",
"sourceRefs",
"verification"
],
[
"servo",
"servo",
"Feetech STS3215-C018",
6,
"lerobot-sts3215",
"sts3215-c018",
"c018-a0",
"offline-configuration; hardware unverified"
],
[
"path component",
"servo",
"Waveshare Bus Servo Adapter (A)",
1,
"lerobot-bus-adapter",
"waveshare-bus-adapter-a",
"waveshare-faq",
"component rating only; assembled path unverified"
]
],
"runtimeHours": null,
"assumptions": [
{
"fieldPath": "paths.servo.limitA",
"value": 5,
"unit": "A",
"evidence": "user-supplied",
"note": "Synthetic user declaration for this case: 5 A source and path; not a measured harness rating."
}
],
"checklist": [
"confirm_revision",
"confirm_polarity",
"measure_rails",
"single_servo",
"scan_ids",
"support_robot"
]
}
}
Was dieses Beispiel nicht nachweist
- Die deklarierte Zahl aktiver Servos erzwingt weder Gleichzeitigkeit noch Strombegrenzung.
- Die 5-A-Grenze des Adapters ist kein automatischer Begrenzer und kein Nachweis für den Kabelbaum.
Referenz erstellt am:
Spezifikationsquellen
Die folgenden Links tragen die Originaltitel der technischen Quellen. Beachten Sie den Versionsstand, das Prüfdatum und die Annahmen des Beispiels.
- Feetech ST-3215-C018 A/0A/0 2023-07-20, electrical specification p3 · geprüft am
- Waveshare Bus Servo Adapter (A) FAQhardware revision not stated · geprüft am
- Arduino UNO Q datasheetRevision 16, 2026-10-30 · geprüft am
- LeRobot SO-101 setup guideLeRobot v0.7.0 / 410c095eacc0011d998a73383eb94abed2715af0 · geprüft am
- Luwu V1.1 PCBA component purchasing BOMedeb42f690907663e0ac2babf7bb858df380a300; component-level procurement ratings · geprüft am
Eine bekannte Teilsumme ist kein Gesamtwert
Darf der 12-V-Stromwert für 8.4 V übernommen werden?
Versionsstand: Microduck electrical rules 2026-11-12.2 · Robot profile SO-101 follower / LeRobot 0.7.0 · C018 current specification A/0 2023-07-20, 12 V test point
Eingaben und Vorgehen
Deklariert sind 8.4 V, sechs C018, davon zwei aktiv, ein 5-V-Wandler mit Wirkungsgrad 0.8 und eine synthetische Platinenlast von 1 A; Quelle und Pfad sind mit 5 A angegeben.
- Betriebsspannungsbereich und Stromprüfpunkt getrennt prüfen.
- C018-Ströme bei 8.4 V unbekannt lassen und nicht interpolieren.
- Nur die bekannte Logiklast umrechnen: 5 × 1 / (8.4 × 0.8).
Referenzergebnis der Prüfung
Prüfung erforderlich
Etwa 0.744048 A sind lediglich eine bekannte Teilsumme an der Quelle. Servobedarf, Gesamtwerte, Obergrenzen und Laufzeit bleiben unbekannt.
Eingaben und Referenz-JSON ansehen
{
"inputs": {
"profileId": "so101-follower-v0.7.0",
"supply": {
"minV": 8.4,
"maxV": 8.4,
"continuousA": 5,
"capacityMah": null,
"nominalV": null,
"chemistry": "external-dc",
"polarityConfirmed": true
},
"paths": [
{
"id": "source",
"label": "Declared 8.4 V source and servo branch",
"parentId": null,
"mode": "pass",
"componentIds": [
"waveshare-adapter-a"
],
"limitA": 5,
"limitSource": "Synthetic user declaration: 5 A source/path; no assembled-path test.",
"assembledVerified": false
},
{
"id": "logic",
"label": "Declared 5 V converter output",
"parentId": "source",
"mode": "regulated",
"componentIds": [],
"outputMinV": 5,
"outputMaxV": 5,
"efficiency": 0.8,
"limitA": 2,
"limitSource": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified.",
"assembledVerified": false
}
],
"motors": [
{
"componentId": "sts3215-c018",
"pathId": "source",
"count": 6,
"activeCount": 2,
"performanceV": 8.4
}
],
"loads": [
{
"id": "uno-q",
"componentId": "uno-q",
"pathId": "logic",
"port": "usb",
"count": 1,
"currentA": 1
}
]
},
"status": "needs_review",
"findings": [
{
"code": "current_unknown",
"severity": "needs_review",
"fieldPath": "motors.0",
"messageKey": "current_unknown",
"details": {
"component": "Feetech STS3215-C018",
"voltage": 8.4
},
"sourceRef": "c018-a0"
}
],
"outputs": {
"scenarios": {
"idle": {
"complete": false,
"knownSubtotalA": 0.744047619047619,
"totalA": null,
"upperA": null,
"paths": [
{
"id": "source",
"complete": false,
"knownSubtotalA": 0.744047619047619,
"totalA": null,
"upperA": null
},
{
"id": "logic",
"complete": true,
"knownSubtotalA": 1,
"totalA": 1,
"upperA": 1
}
]
},
"rated": {
"complete": false,
"knownSubtotalA": 0.744047619047619,
"totalA": null,
"upperA": null,
"paths": [
{
"id": "source",
"complete": false,
"knownSubtotalA": 0.744047619047619,
"totalA": null,
"upperA": null
},
{
"id": "logic",
"complete": true,
"knownSubtotalA": 1,
"totalA": 1,
"upperA": 1
}
]
},
"stall": {
"complete": false,
"knownSubtotalA": 0.744047619047619,
"totalA": null,
"upperA": null,
"paths": [
{
"id": "source",
"complete": false,
"knownSubtotalA": 0.744047619047619,
"totalA": null,
"upperA": null
},
{
"id": "logic",
"complete": true,
"knownSubtotalA": 1,
"totalA": 1,
"upperA": 1
}
]
}
},
"paths": [
{
"id": "source",
"label": "Declared 8.4 V source and servo branch",
"parentId": null,
"voltage": {
"minV": 8.4,
"maxV": 8.4
},
"knownComponentLimitA": 5,
"assembledPathVerified": false,
"scenarios": {
"idle": {
"complete": false,
"knownSubtotalA": 0.744047619047619,
"totalA": null,
"upperA": null
},
"rated": {
"complete": false,
"knownSubtotalA": 0.744047619047619,
"totalA": null,
"upperA": null
},
"stall": {
"complete": false,
"knownSubtotalA": 0.744047619047619,
"totalA": null,
"upperA": null
}
}
},
{
"id": "logic",
"label": "Declared 5 V converter output",
"parentId": "source",
"voltage": {
"minV": 5,
"maxV": 5
},
"knownComponentLimitA": 2,
"assembledPathVerified": false,
"scenarios": {
"idle": {
"complete": true,
"knownSubtotalA": 1,
"totalA": 1,
"upperA": 1
},
"rated": {
"complete": true,
"knownSubtotalA": 1,
"totalA": 1,
"upperA": 1
},
"stall": {
"complete": true,
"knownSubtotalA": 1,
"totalA": 1,
"upperA": 1
}
}
}
],
"bom": [
[
"role",
"path",
"component",
"quantity",
"productId",
"variantId",
"sourceRefs",
"verification"
],
[
"servo",
"source",
"Feetech STS3215-C018",
6,
"lerobot-sts3215",
"sts3215-c018",
"c018-a0",
"offline-configuration; hardware unverified"
],
[
"path component",
"source",
"Waveshare Bus Servo Adapter (A)",
1,
"lerobot-bus-adapter",
"waveshare-bus-adapter-a",
"waveshare-faq",
"component rating only; assembled path unverified"
],
[
"logic load",
"logic",
"Arduino UNO Q",
1,
"uno-q-2gb",
"abx00162",
"unoq-r16;luwu-v11",
"declared load; hardware unverified"
]
],
"runtimeHours": null,
"assumptions": [
{
"fieldPath": "paths.source.limitA",
"value": 5,
"unit": "A",
"evidence": "user-supplied",
"note": "Synthetic user declaration: 5 A source/path; no assembled-path test."
},
{
"fieldPath": "paths.logic.limitA",
"value": 2,
"unit": "A",
"evidence": "user-supplied",
"note": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified."
},
{
"fieldPath": "loads.0.currentA",
"evidence": "user-supplied",
"value": 1,
"unit": "A"
}
],
"checklist": [
"confirm_revision",
"confirm_polarity",
"measure_rails",
"single_servo",
"scan_ids",
"support_robot"
]
}
}
Anpassen und erneut prüfen
Am gesonderten 12-V-Punkt beträgt der Quellenbedarf bei Nennlast etwa 2.440833 A. Die obere Blockierlast beträgt 18.340833 A; die Anpassung bleibt prüfbedürftig.
Prüfung erforderlich
Angepasste Referenz als JSON ansehen
{
"inputs": {
"profileId": "so101-follower-v0.7.0",
"supply": {
"minV": 12,
"maxV": 12,
"continuousA": 5,
"capacityMah": null,
"nominalV": null,
"chemistry": "external-dc",
"polarityConfirmed": true
},
"paths": [
{
"id": "source",
"label": "Declared 12 V source and servo branch",
"parentId": null,
"mode": "pass",
"componentIds": [
"waveshare-adapter-a"
],
"limitA": 5,
"limitSource": "Synthetic user declaration: 5 A source/path; no assembled-path test.",
"assembledVerified": false
},
{
"id": "logic",
"label": "Declared 5 V converter output",
"parentId": "source",
"mode": "regulated",
"componentIds": [],
"outputMinV": 5,
"outputMaxV": 5,
"efficiency": 0.8,
"limitA": 2,
"limitSource": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified.",
"assembledVerified": false
}
],
"motors": [
{
"componentId": "sts3215-c018",
"pathId": "source",
"count": 6,
"activeCount": 2,
"performanceV": 12
}
],
"loads": [
{
"id": "uno-q",
"componentId": "uno-q",
"pathId": "logic",
"port": "usb",
"count": 1,
"currentA": 1
}
]
},
"status": "needs_review",
"findings": [
{
"code": "stall_over_limit",
"severity": "needs_review",
"fieldPath": "paths.source",
"messageKey": "stall_over_limit",
"details": {
"scenario": "stall",
"current": 18.341,
"limit": 5,
"path": "Declared 12 V source and servo branch"
},
"sourceRef": null
},
{
"code": "stall_over_limit",
"severity": "needs_review",
"fieldPath": "supply.continuousA",
"messageKey": "stall_over_limit",
"details": {
"scenario": "stall",
"current": 18.341,
"limit": 5,
"path": "supply"
},
"sourceRef": null
}
],
"outputs": {
"scenarios": {
"idle": {
"complete": true,
"knownSubtotalA": 0.7008333333333334,
"totalA": 0.7008333333333334,
"upperA": 0.7008333333333334,
"paths": [
{
"id": "source",
"complete": true,
"knownSubtotalA": 0.7008333333333334,
"totalA": 0.7008333333333334,
"upperA": 0.7008333333333334
},
{
"id": "logic",
"complete": true,
"knownSubtotalA": 1,
"totalA": 1,
"upperA": 1
}
]
},
"rated": {
"complete": true,
"knownSubtotalA": 2.4408333333333334,
"totalA": 2.4408333333333334,
"upperA": 2.4408333333333334,
"paths": [
{
"id": "source",
"complete": true,
"knownSubtotalA": 2.4408333333333334,
"totalA": 2.4408333333333334,
"upperA": 2.4408333333333334
},
{
"id": "logic",
"complete": true,
"knownSubtotalA": 1,
"totalA": 1,
"upperA": 1
}
]
},
"stall": {
"complete": true,
"knownSubtotalA": 16.720833333333335,
"totalA": 16.720833333333335,
"upperA": 18.340833333333336,
"paths": [
{
"id": "source",
"complete": true,
"knownSubtotalA": 16.720833333333335,
"totalA": 16.720833333333335,
"upperA": 18.340833333333336
},
{
"id": "logic",
"complete": true,
"knownSubtotalA": 1,
"totalA": 1,
"upperA": 1
}
]
}
},
"paths": [
{
"id": "source",
"label": "Declared 12 V source and servo branch",
"parentId": null,
"voltage": {
"minV": 12,
"maxV": 12
},
"knownComponentLimitA": 5,
"assembledPathVerified": false,
"scenarios": {
"idle": {
"complete": true,
"knownSubtotalA": 0.7008333333333334,
"totalA": 0.7008333333333334,
"upperA": 0.7008333333333334
},
"rated": {
"complete": true,
"knownSubtotalA": 2.4408333333333334,
"totalA": 2.4408333333333334,
"upperA": 2.4408333333333334
},
"stall": {
"complete": true,
"knownSubtotalA": 16.720833333333335,
"totalA": 16.720833333333335,
"upperA": 18.340833333333336
}
}
},
{
"id": "logic",
"label": "Declared 5 V converter output",
"parentId": "source",
"voltage": {
"minV": 5,
"maxV": 5
},
"knownComponentLimitA": 2,
"assembledPathVerified": false,
"scenarios": {
"idle": {
"complete": true,
"knownSubtotalA": 1,
"totalA": 1,
"upperA": 1
},
"rated": {
"complete": true,
"knownSubtotalA": 1,
"totalA": 1,
"upperA": 1
},
"stall": {
"complete": true,
"knownSubtotalA": 1,
"totalA": 1,
"upperA": 1
}
}
}
],
"bom": [
[
"role",
"path",
"component",
"quantity",
"productId",
"variantId",
"sourceRefs",
"verification"
],
[
"servo",
"source",
"Feetech STS3215-C018",
6,
"lerobot-sts3215",
"sts3215-c018",
"c018-a0",
"offline-configuration; hardware unverified"
],
[
"path component",
"source",
"Waveshare Bus Servo Adapter (A)",
1,
"lerobot-bus-adapter",
"waveshare-bus-adapter-a",
"waveshare-faq",
"component rating only; assembled path unverified"
],
[
"logic load",
"logic",
"Arduino UNO Q",
1,
"uno-q-2gb",
"abx00162",
"unoq-r16;luwu-v11",
"declared load; hardware unverified"
]
],
"runtimeHours": null,
"assumptions": [
{
"fieldPath": "paths.source.limitA",
"value": 5,
"unit": "A",
"evidence": "user-supplied",
"note": "Synthetic user declaration: 5 A source/path; no assembled-path test."
},
{
"fieldPath": "paths.logic.limitA",
"value": 2,
"unit": "A",
"evidence": "user-supplied",
"note": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified."
},
{
"fieldPath": "loads.0.currentA",
"evidence": "user-supplied",
"value": 1,
"unit": "A"
}
],
"checklist": [
"confirm_revision",
"confirm_polarity",
"measure_rails",
"single_servo",
"scan_ids",
"support_robot"
]
}
}
Was dieses Beispiel nicht nachweist
- Ein Wechsel des Entwurfs auf 12 V ist ein neues deklariertes Szenario, kein Nachweis für 8.4 V.
- Der getrennte C001-Konflikt zur Mindestspannung bei 5 V wird damit nicht gelöst.
Referenz erstellt am:
Spezifikationsquellen
Die folgenden Links tragen die Originaltitel der technischen Quellen. Beachten Sie den Versionsstand, das Prüfdatum und die Annahmen des Beispiels.
- Feetech ST-3215-C018 A/0A/0 2023-07-20, electrical specification p3 · geprüft am
- Waveshare Bus Servo Adapter (A) FAQhardware revision not stated · geprüft am
- Arduino UNO Q datasheetRevision 16, 2026-10-30 · geprüft am
- LeRobot SO-101 setup guideLeRobot v0.7.0 / 410c095eacc0011d998a73383eb94abed2715af0 · geprüft am
- Luwu V1.1 PCBA component purchasing BOMedeb42f690907663e0ac2babf7bb858df380a300; component-level procurement ratings · geprüft am