Microduck Robot●microduck-robot.com
도구

전원 및 부품표 검사

실제 하드웨어를 다루기 전에 전원 경로와 부품표를 비교하세요.

도구 불러오는 중…

로봇 전원 경로와 BOM 검사

선언한 전기 구성을 알려진 부품 데이터와 비교합니다. 전원 전압, 변환기 출력과 서보 전류 사양의 전압점을 구분하세요.

로봇 프리셋

  • SO-101 leader
  • SO-101 follower
  • Microduck UNO Q / V1.1

규칙 버전: 2026-11-12.2

전압과 전류 근거 입력

최저·최고 전압은 V, 전류 한계는 A로 입력합니다. 서보 수, 동시 작동 수와 전류 시험 전압을 기입합니다. 직접 제공하는 모터 전류에는 측정 또는 출처 설명이 필요하며 미지 값은 자동 보충하지 않습니다.

전원 경로 확인 순서

  1. 프리셋을 선택하고 전원, 변환기, 제어 보드, 서보 분기, 입력 포트와 극성을 확인합니다.
  2. 전체 경로의 알려진 한계와 근거를 입력하고 변환기 출력 전압 및 알려진 효율을 기입합니다.
  3. 대기, 선언 연속 부하, 전체 서보 스톨(축 구속) 부하를 비교하고 최초 전원 투입 목록을 읽습니다.

저장할 수 있는 자료

프로젝트와 JSON 보고서 또는 상품·변형 참조가 포함된 BOM CSV를 저장합니다. 알려진 소계는 전체 부하가 아닙니다. 부품 링크는 자동 주문하거나 가격을 변경하지 않습니다.

추정의 한계

전류는 명시된 전압점에만 적용하며 보간하지 않습니다. 연속 부하 초과는 해당 조건을 차단하고 스톨 전류 초과는 위험을 표시합니다. 커넥터와 퓨즈 정격이 조립 경로 전체를 인증하지 않습니다. 배터리 용량만으로 사용 시간이나 실제 안전을 증명할 수도 없습니다.

전원 경로를 끝까지 계산하는 사례

선언한 입력부터 보고서까지 세 가지 오프라인 계산을 따라갑니다. 전원, 변환기, 배선 한계와 보드 부하는 합성 사용자 선언이며 실측값이 아닙니다. 서보 전류는 명시된 전압 시험점에서만 사용합니다.

로컬 검사는 실제 하드웨어나 안전성을 검증하지 않습니다. 이 합성 예제는 위 양식에 입력한 설정과 별개인 참고 자료입니다. 예제를 가져오면 입력값을 다시 검사하며 저장된 판정을 그대로 신뢰하지 않습니다.

변환기 앞뒤의 전류는 다릅니다

5 V 부하 전류를 12 V 서보 전류에 바로 더할 수 있나요?

기준 버전: Microduck electrical rules 2026-11-12.2 · Robot profile SO-101 follower / LeRobot 0.7.0 · C018 current specification A/0 2023-07-20, 12 V test point

입력 조건과 확인 순서

12 V / 4 A, 12 V 시험점의 C018 1개, 효율 0.8인 5 V 변환기, 출력 경로 한계 2 A와 UNO Q USB 부하 1 A를 선언합니다.

  1. 12 V 서보 경로와 5 V 로직 경로를 나눕니다.
  2. 로직 부하를 전원 쪽으로 환산합니다: 5 × 1 / (12 × 0.8).
  3. 각 시나리오에 입력 전류를 더하고 해당 경로의 한계와 비교합니다.

예제의 기준 검사 결과

알려진 구성 충돌 없음

전원 쪽 대기/정격 부하/스톨 전류는 약 0.550833 / 1.420833 / 3.220833 A입니다. +10% 스톨 상한은 3.490833 A로, 선언한 4 A와 알려진 충돌이 없습니다.

입력과 기준 결과 JSON 보기
{
  "inputs": {
    "profileId": "so101-follower-v0.7.0",
    "supply": {
      "minV": 12,
      "maxV": 12,
      "continuousA": 4,
      "capacityMah": null,
      "nominalV": null,
      "chemistry": "external-dc",
      "polarityConfirmed": true
    },
    "paths": [
      {
        "id": "source",
        "label": "12 V source and servo branch",
        "parentId": null,
        "mode": "pass",
        "componentIds": [
          "waveshare-adapter-a"
        ],
        "limitA": 4,
        "limitSource": "Synthetic user declaration for this reference case: 4 A assembled-path limit; not a measurement.",
        "assembledVerified": false
      },
      {
        "id": "logic",
        "label": "Declared 5 V converter output",
        "parentId": "source",
        "mode": "regulated",
        "componentIds": [],
        "outputMinV": 5,
        "outputMaxV": 5,
        "efficiency": 0.8,
        "limitA": 2,
        "limitSource": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified.",
        "assembledVerified": false
      }
    ],
    "motors": [
      {
        "componentId": "sts3215-c018",
        "pathId": "source",
        "count": 1,
        "activeCount": 1,
        "performanceV": 12
      }
    ],
    "loads": [
      {
        "id": "uno-q",
        "componentId": "uno-q",
        "pathId": "logic",
        "port": "usb",
        "count": 1,
        "currentA": 1
      }
    ]
  },
  "status": "no_known_conflict",
  "findings": [],
  "outputs": {
    "scenarios": {
      "idle": {
        "complete": true,
        "knownSubtotalA": 0.5508333333333334,
        "totalA": 0.5508333333333334,
        "upperA": 0.5508333333333334,
        "paths": [
          {
            "id": "source",
            "complete": true,
            "knownSubtotalA": 0.5508333333333334,
            "totalA": 0.5508333333333334,
            "upperA": 0.5508333333333334
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      },
      "rated": {
        "complete": true,
        "knownSubtotalA": 1.4208333333333334,
        "totalA": 1.4208333333333334,
        "upperA": 1.4208333333333334,
        "paths": [
          {
            "id": "source",
            "complete": true,
            "knownSubtotalA": 1.4208333333333334,
            "totalA": 1.4208333333333334,
            "upperA": 1.4208333333333334
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      },
      "stall": {
        "complete": true,
        "knownSubtotalA": 3.2208333333333337,
        "totalA": 3.2208333333333337,
        "upperA": 3.490833333333334,
        "paths": [
          {
            "id": "source",
            "complete": true,
            "knownSubtotalA": 3.2208333333333337,
            "totalA": 3.2208333333333337,
            "upperA": 3.490833333333334
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      }
    },
    "paths": [
      {
        "id": "source",
        "label": "12 V source and servo branch",
        "parentId": null,
        "voltage": {
          "minV": 12,
          "maxV": 12
        },
        "knownComponentLimitA": 4,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 0.5508333333333334,
            "totalA": 0.5508333333333334,
            "upperA": 0.5508333333333334
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 1.4208333333333334,
            "totalA": 1.4208333333333334,
            "upperA": 1.4208333333333334
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 3.2208333333333337,
            "totalA": 3.2208333333333337,
            "upperA": 3.490833333333334
          }
        }
      },
      {
        "id": "logic",
        "label": "Declared 5 V converter output",
        "parentId": "source",
        "voltage": {
          "minV": 5,
          "maxV": 5
        },
        "knownComponentLimitA": 2,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        }
      }
    ],
    "bom": [
      [
        "role",
        "path",
        "component",
        "quantity",
        "productId",
        "variantId",
        "sourceRefs",
        "verification"
      ],
      [
        "servo",
        "source",
        "Feetech STS3215-C018",
        1,
        "lerobot-sts3215",
        "sts3215-c018",
        "c018-a0",
        "offline-configuration; hardware unverified"
      ],
      [
        "path component",
        "source",
        "Waveshare Bus Servo Adapter (A)",
        1,
        "lerobot-bus-adapter",
        "waveshare-bus-adapter-a",
        "waveshare-faq",
        "component rating only; assembled path unverified"
      ],
      [
        "logic load",
        "logic",
        "Arduino UNO Q",
        1,
        "uno-q-2gb",
        "abx00162",
        "unoq-r16;luwu-v11",
        "declared load; hardware unverified"
      ]
    ],
    "runtimeHours": null,
    "assumptions": [
      {
        "fieldPath": "paths.source.limitA",
        "value": 4,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration for this reference case: 4 A assembled-path limit; not a measurement."
      },
      {
        "fieldPath": "paths.logic.limitA",
        "value": 2,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified."
      },
      {
        "fieldPath": "loads.0.currentA",
        "evidence": "user-supplied",
        "value": 1,
        "unit": "A"
      }
    ],
    "checklist": [
      "confirm_revision",
      "confirm_polarity",
      "measure_rails",
      "single_servo",
      "scan_ids",
      "support_robot"
    ]
  }
}

이 예제로 확인할 수 없는 사항

  • 한계, 효율, 부하와 극성 확인은 모두 예시 선언입니다. 서보 한 경로이지 완성된 로봇 팔의 검증이 아닙니다.
  • 부품 정격은 조립된 경로의 정격이 아닙니다. 실물 안전과 사용 시간은 검증되지 않았습니다.

기준 자료 작성일:

사양 출처

아래 링크에는 기술 자료의 원래 제목을 표시합니다. 예제의 전제 조건과 함께 버전 및 확인일을 확인하세요.

연속 과부하는 계속 차단됩니다

선언한 5 A가 C018 6개의 동시 동작을 감당하나요?

기준 버전: Microduck electrical rules 2026-11-12.2 · Robot profile SO-101 follower / LeRobot 0.7.0 · C018 current specification A/0 2023-07-20, 12 V test point

입력 조건과 확인 순서

공식 12 V 전류 시험점, 서보 6개 모두 동작, 전원과 경로 한계는 합성 선언 5 A입니다.

  1. 연속 수요를 계산합니다: 6 × 0.9 = 5.4 A.
  2. 전체 스톨을 따로 봅니다: 기본 16.2 A, +10% 상한 17.82 A.
  3. 동작 수 선언만 2개로 바꾼 입력을 다시 확인합니다.

예제의 기준 검사 결과

사용할 수 없는 구성

5.4 A가 5 A를 넘으므로 선언한 연속 시나리오는 차단됩니다. 스톨 초과는 별도의 검토 위험입니다.

입력과 기준 결과 JSON 보기
{
  "inputs": {
    "profileId": "so101-follower-v0.7.0",
    "supply": {
      "minV": 12,
      "maxV": 12,
      "continuousA": 5,
      "capacityMah": null,
      "nominalV": null,
      "chemistry": "external-dc",
      "polarityConfirmed": true
    },
    "paths": [
      {
        "id": "servo",
        "label": "12 V adapter and harness",
        "parentId": null,
        "mode": "pass",
        "componentIds": [
          "waveshare-adapter-a"
        ],
        "limitA": 5,
        "limitSource": "Synthetic user declaration for this case: 5 A source and path; not a measured harness rating.",
        "assembledVerified": false
      }
    ],
    "motors": [
      {
        "componentId": "sts3215-c018",
        "pathId": "servo",
        "count": 6,
        "activeCount": 6,
        "performanceV": 12
      }
    ],
    "loads": []
  },
  "status": "blocked",
  "findings": [
    {
      "code": "continuous_over_limit",
      "severity": "blocked",
      "fieldPath": "paths.servo",
      "messageKey": "continuous_over_limit",
      "details": {
        "scenario": "rated",
        "current": 5.4,
        "limit": 5,
        "path": "12 V adapter and harness"
      },
      "sourceRef": null
    },
    {
      "code": "stall_over_limit",
      "severity": "needs_review",
      "fieldPath": "paths.servo",
      "messageKey": "stall_over_limit",
      "details": {
        "scenario": "stall",
        "current": 17.82,
        "limit": 5,
        "path": "12 V adapter and harness"
      },
      "sourceRef": null
    },
    {
      "code": "continuous_over_limit",
      "severity": "blocked",
      "fieldPath": "supply.continuousA",
      "messageKey": "continuous_over_limit",
      "details": {
        "scenario": "rated",
        "current": 5.4,
        "limit": 5,
        "path": "supply"
      },
      "sourceRef": null
    },
    {
      "code": "stall_over_limit",
      "severity": "needs_review",
      "fieldPath": "supply.continuousA",
      "messageKey": "stall_over_limit",
      "details": {
        "scenario": "stall",
        "current": 17.82,
        "limit": 5,
        "path": "supply"
      },
      "sourceRef": null
    }
  ],
  "outputs": {
    "scenarios": {
      "idle": {
        "complete": true,
        "knownSubtotalA": 0.18,
        "totalA": 0.18,
        "upperA": 0.18,
        "paths": [
          {
            "id": "servo",
            "complete": true,
            "knownSubtotalA": 0.18,
            "totalA": 0.18,
            "upperA": 0.18
          }
        ]
      },
      "rated": {
        "complete": true,
        "knownSubtotalA": 5.4,
        "totalA": 5.4,
        "upperA": 5.4,
        "paths": [
          {
            "id": "servo",
            "complete": true,
            "knownSubtotalA": 5.4,
            "totalA": 5.4,
            "upperA": 5.4
          }
        ]
      },
      "stall": {
        "complete": true,
        "knownSubtotalA": 16.200000000000003,
        "totalA": 16.200000000000003,
        "upperA": 17.820000000000004,
        "paths": [
          {
            "id": "servo",
            "complete": true,
            "knownSubtotalA": 16.200000000000003,
            "totalA": 16.200000000000003,
            "upperA": 17.820000000000004
          }
        ]
      }
    },
    "paths": [
      {
        "id": "servo",
        "label": "12 V adapter and harness",
        "parentId": null,
        "voltage": {
          "minV": 12,
          "maxV": 12
        },
        "knownComponentLimitA": 5,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 0.18,
            "totalA": 0.18,
            "upperA": 0.18
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 5.4,
            "totalA": 5.4,
            "upperA": 5.4
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 16.200000000000003,
            "totalA": 16.200000000000003,
            "upperA": 17.820000000000004
          }
        }
      }
    ],
    "bom": [
      [
        "role",
        "path",
        "component",
        "quantity",
        "productId",
        "variantId",
        "sourceRefs",
        "verification"
      ],
      [
        "servo",
        "servo",
        "Feetech STS3215-C018",
        6,
        "lerobot-sts3215",
        "sts3215-c018",
        "c018-a0",
        "offline-configuration; hardware unverified"
      ],
      [
        "path component",
        "servo",
        "Waveshare Bus Servo Adapter (A)",
        1,
        "lerobot-bus-adapter",
        "waveshare-bus-adapter-a",
        "waveshare-faq",
        "component rating only; assembled path unverified"
      ]
    ],
    "runtimeHours": null,
    "assumptions": [
      {
        "fieldPath": "paths.servo.limitA",
        "value": 5,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration for this case: 5 A source and path; not a measured harness rating."
      }
    ],
    "checklist": [
      "confirm_revision",
      "confirm_polarity",
      "measure_rails",
      "single_servo",
      "scan_ids",
      "support_robot"
    ]
  }
}

설정을 바꾸고 다시 확인

동작 2개와 대기 4개는 1.92 A지만 전체 스톨은 16.2 A, 상한 17.82 A 그대로입니다. 조정 후에도 검토가 필요합니다.

확인 필요

변경한 기준 JSON 보기
{
  "inputs": {
    "profileId": "so101-follower-v0.7.0",
    "supply": {
      "minV": 12,
      "maxV": 12,
      "continuousA": 5,
      "capacityMah": null,
      "nominalV": null,
      "chemistry": "external-dc",
      "polarityConfirmed": true
    },
    "paths": [
      {
        "id": "servo",
        "label": "12 V adapter and harness",
        "parentId": null,
        "mode": "pass",
        "componentIds": [
          "waveshare-adapter-a"
        ],
        "limitA": 5,
        "limitSource": "Synthetic user declaration for this case: 5 A source and path; not a measured harness rating.",
        "assembledVerified": false
      }
    ],
    "motors": [
      {
        "componentId": "sts3215-c018",
        "pathId": "servo",
        "count": 6,
        "activeCount": 2,
        "performanceV": 12
      }
    ],
    "loads": []
  },
  "status": "needs_review",
  "findings": [
    {
      "code": "stall_over_limit",
      "severity": "needs_review",
      "fieldPath": "paths.servo",
      "messageKey": "stall_over_limit",
      "details": {
        "scenario": "stall",
        "current": 17.82,
        "limit": 5,
        "path": "12 V adapter and harness"
      },
      "sourceRef": null
    },
    {
      "code": "stall_over_limit",
      "severity": "needs_review",
      "fieldPath": "supply.continuousA",
      "messageKey": "stall_over_limit",
      "details": {
        "scenario": "stall",
        "current": 17.82,
        "limit": 5,
        "path": "supply"
      },
      "sourceRef": null
    }
  ],
  "outputs": {
    "scenarios": {
      "idle": {
        "complete": true,
        "knownSubtotalA": 0.18,
        "totalA": 0.18,
        "upperA": 0.18,
        "paths": [
          {
            "id": "servo",
            "complete": true,
            "knownSubtotalA": 0.18,
            "totalA": 0.18,
            "upperA": 0.18
          }
        ]
      },
      "rated": {
        "complete": true,
        "knownSubtotalA": 1.92,
        "totalA": 1.92,
        "upperA": 1.92,
        "paths": [
          {
            "id": "servo",
            "complete": true,
            "knownSubtotalA": 1.92,
            "totalA": 1.92,
            "upperA": 1.92
          }
        ]
      },
      "stall": {
        "complete": true,
        "knownSubtotalA": 16.200000000000003,
        "totalA": 16.200000000000003,
        "upperA": 17.820000000000004,
        "paths": [
          {
            "id": "servo",
            "complete": true,
            "knownSubtotalA": 16.200000000000003,
            "totalA": 16.200000000000003,
            "upperA": 17.820000000000004
          }
        ]
      }
    },
    "paths": [
      {
        "id": "servo",
        "label": "12 V adapter and harness",
        "parentId": null,
        "voltage": {
          "minV": 12,
          "maxV": 12
        },
        "knownComponentLimitA": 5,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 0.18,
            "totalA": 0.18,
            "upperA": 0.18
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 1.92,
            "totalA": 1.92,
            "upperA": 1.92
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 16.200000000000003,
            "totalA": 16.200000000000003,
            "upperA": 17.820000000000004
          }
        }
      }
    ],
    "bom": [
      [
        "role",
        "path",
        "component",
        "quantity",
        "productId",
        "variantId",
        "sourceRefs",
        "verification"
      ],
      [
        "servo",
        "servo",
        "Feetech STS3215-C018",
        6,
        "lerobot-sts3215",
        "sts3215-c018",
        "c018-a0",
        "offline-configuration; hardware unverified"
      ],
      [
        "path component",
        "servo",
        "Waveshare Bus Servo Adapter (A)",
        1,
        "lerobot-bus-adapter",
        "waveshare-bus-adapter-a",
        "waveshare-faq",
        "component rating only; assembled path unverified"
      ]
    ],
    "runtimeHours": null,
    "assumptions": [
      {
        "fieldPath": "paths.servo.limitA",
        "value": 5,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration for this case: 5 A source and path; not a measured harness rating."
      }
    ],
    "checklist": [
      "confirm_revision",
      "confirm_polarity",
      "measure_rails",
      "single_servo",
      "scan_ids",
      "support_robot"
    ]
  }
}

이 예제로 확인할 수 없는 사항

  • 동작 수를 적게 선언해도 실제 동시 동작이나 전류가 제한되지는 않습니다.
  • 어댑터 최대 5 A는 자동 전류 제한이나 하네스 용량의 증명이 아닙니다.

기준 자료 작성일:

사양 출처

아래 링크에는 기술 자료의 원래 제목을 표시합니다. 예제의 전제 조건과 함께 버전 및 확인일을 확인하세요.

알려진 소계는 합계가 아닙니다

12 V 전류 값을 8.4 V에 적용해도 되나요?

기준 버전: Microduck electrical rules 2026-11-12.2 · Robot profile SO-101 follower / LeRobot 0.7.0 · C018 current specification A/0 2023-07-20, 12 V test point

입력 조건과 확인 순서

8.4 V, C018 6개 중 2개 동작, 효율 0.8의 5 V 변환기와 합성 보드 부하 1 A를 선언합니다. 전원과 경로 한계는 5 A입니다.

  1. 동작 전압 범위와 전류 시험점을 구분합니다.
  2. 8.4 V의 C018 전류는 알 수 없으므로 보간하지 않습니다.
  3. 알려진 로직 부하만 계산합니다: 5 × 1 / (8.4 × 0.8).

예제의 기준 검사 결과

확인 필요

약 0.744048 A는 전원 쪽에서 알려진 소계뿐입니다. 서보 수요, 합계, 상한과 사용 시간은 알 수 없습니다.

입력과 기준 결과 JSON 보기
{
  "inputs": {
    "profileId": "so101-follower-v0.7.0",
    "supply": {
      "minV": 8.4,
      "maxV": 8.4,
      "continuousA": 5,
      "capacityMah": null,
      "nominalV": null,
      "chemistry": "external-dc",
      "polarityConfirmed": true
    },
    "paths": [
      {
        "id": "source",
        "label": "Declared 8.4 V source and servo branch",
        "parentId": null,
        "mode": "pass",
        "componentIds": [
          "waveshare-adapter-a"
        ],
        "limitA": 5,
        "limitSource": "Synthetic user declaration: 5 A source/path; no assembled-path test.",
        "assembledVerified": false
      },
      {
        "id": "logic",
        "label": "Declared 5 V converter output",
        "parentId": "source",
        "mode": "regulated",
        "componentIds": [],
        "outputMinV": 5,
        "outputMaxV": 5,
        "efficiency": 0.8,
        "limitA": 2,
        "limitSource": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified.",
        "assembledVerified": false
      }
    ],
    "motors": [
      {
        "componentId": "sts3215-c018",
        "pathId": "source",
        "count": 6,
        "activeCount": 2,
        "performanceV": 8.4
      }
    ],
    "loads": [
      {
        "id": "uno-q",
        "componentId": "uno-q",
        "pathId": "logic",
        "port": "usb",
        "count": 1,
        "currentA": 1
      }
    ]
  },
  "status": "needs_review",
  "findings": [
    {
      "code": "current_unknown",
      "severity": "needs_review",
      "fieldPath": "motors.0",
      "messageKey": "current_unknown",
      "details": {
        "component": "Feetech STS3215-C018",
        "voltage": 8.4
      },
      "sourceRef": "c018-a0"
    }
  ],
  "outputs": {
    "scenarios": {
      "idle": {
        "complete": false,
        "knownSubtotalA": 0.744047619047619,
        "totalA": null,
        "upperA": null,
        "paths": [
          {
            "id": "source",
            "complete": false,
            "knownSubtotalA": 0.744047619047619,
            "totalA": null,
            "upperA": null
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      },
      "rated": {
        "complete": false,
        "knownSubtotalA": 0.744047619047619,
        "totalA": null,
        "upperA": null,
        "paths": [
          {
            "id": "source",
            "complete": false,
            "knownSubtotalA": 0.744047619047619,
            "totalA": null,
            "upperA": null
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      },
      "stall": {
        "complete": false,
        "knownSubtotalA": 0.744047619047619,
        "totalA": null,
        "upperA": null,
        "paths": [
          {
            "id": "source",
            "complete": false,
            "knownSubtotalA": 0.744047619047619,
            "totalA": null,
            "upperA": null
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      }
    },
    "paths": [
      {
        "id": "source",
        "label": "Declared 8.4 V source and servo branch",
        "parentId": null,
        "voltage": {
          "minV": 8.4,
          "maxV": 8.4
        },
        "knownComponentLimitA": 5,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": false,
            "knownSubtotalA": 0.744047619047619,
            "totalA": null,
            "upperA": null
          },
          "rated": {
            "complete": false,
            "knownSubtotalA": 0.744047619047619,
            "totalA": null,
            "upperA": null
          },
          "stall": {
            "complete": false,
            "knownSubtotalA": 0.744047619047619,
            "totalA": null,
            "upperA": null
          }
        }
      },
      {
        "id": "logic",
        "label": "Declared 5 V converter output",
        "parentId": "source",
        "voltage": {
          "minV": 5,
          "maxV": 5
        },
        "knownComponentLimitA": 2,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        }
      }
    ],
    "bom": [
      [
        "role",
        "path",
        "component",
        "quantity",
        "productId",
        "variantId",
        "sourceRefs",
        "verification"
      ],
      [
        "servo",
        "source",
        "Feetech STS3215-C018",
        6,
        "lerobot-sts3215",
        "sts3215-c018",
        "c018-a0",
        "offline-configuration; hardware unverified"
      ],
      [
        "path component",
        "source",
        "Waveshare Bus Servo Adapter (A)",
        1,
        "lerobot-bus-adapter",
        "waveshare-bus-adapter-a",
        "waveshare-faq",
        "component rating only; assembled path unverified"
      ],
      [
        "logic load",
        "logic",
        "Arduino UNO Q",
        1,
        "uno-q-2gb",
        "abx00162",
        "unoq-r16;luwu-v11",
        "declared load; hardware unverified"
      ]
    ],
    "runtimeHours": null,
    "assumptions": [
      {
        "fieldPath": "paths.source.limitA",
        "value": 5,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration: 5 A source/path; no assembled-path test."
      },
      {
        "fieldPath": "paths.logic.limitA",
        "value": 2,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified."
      },
      {
        "fieldPath": "loads.0.currentA",
        "evidence": "user-supplied",
        "value": 1,
        "unit": "A"
      }
    ],
    "checklist": [
      "confirm_revision",
      "confirm_polarity",
      "measure_rails",
      "single_servo",
      "scan_ids",
      "support_robot"
    ]
  }
}

설정을 바꾸고 다시 확인

별도의 12 V 시험점에서 전원 쪽 정격 부하는 약 2.440833 A입니다. 스톨 상한은 18.340833 A여서 조정 후에도 검토가 필요합니다.

확인 필요

변경한 기준 JSON 보기
{
  "inputs": {
    "profileId": "so101-follower-v0.7.0",
    "supply": {
      "minV": 12,
      "maxV": 12,
      "continuousA": 5,
      "capacityMah": null,
      "nominalV": null,
      "chemistry": "external-dc",
      "polarityConfirmed": true
    },
    "paths": [
      {
        "id": "source",
        "label": "Declared 12 V source and servo branch",
        "parentId": null,
        "mode": "pass",
        "componentIds": [
          "waveshare-adapter-a"
        ],
        "limitA": 5,
        "limitSource": "Synthetic user declaration: 5 A source/path; no assembled-path test.",
        "assembledVerified": false
      },
      {
        "id": "logic",
        "label": "Declared 5 V converter output",
        "parentId": "source",
        "mode": "regulated",
        "componentIds": [],
        "outputMinV": 5,
        "outputMaxV": 5,
        "efficiency": 0.8,
        "limitA": 2,
        "limitSource": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified.",
        "assembledVerified": false
      }
    ],
    "motors": [
      {
        "componentId": "sts3215-c018",
        "pathId": "source",
        "count": 6,
        "activeCount": 2,
        "performanceV": 12
      }
    ],
    "loads": [
      {
        "id": "uno-q",
        "componentId": "uno-q",
        "pathId": "logic",
        "port": "usb",
        "count": 1,
        "currentA": 1
      }
    ]
  },
  "status": "needs_review",
  "findings": [
    {
      "code": "stall_over_limit",
      "severity": "needs_review",
      "fieldPath": "paths.source",
      "messageKey": "stall_over_limit",
      "details": {
        "scenario": "stall",
        "current": 18.341,
        "limit": 5,
        "path": "Declared 12 V source and servo branch"
      },
      "sourceRef": null
    },
    {
      "code": "stall_over_limit",
      "severity": "needs_review",
      "fieldPath": "supply.continuousA",
      "messageKey": "stall_over_limit",
      "details": {
        "scenario": "stall",
        "current": 18.341,
        "limit": 5,
        "path": "supply"
      },
      "sourceRef": null
    }
  ],
  "outputs": {
    "scenarios": {
      "idle": {
        "complete": true,
        "knownSubtotalA": 0.7008333333333334,
        "totalA": 0.7008333333333334,
        "upperA": 0.7008333333333334,
        "paths": [
          {
            "id": "source",
            "complete": true,
            "knownSubtotalA": 0.7008333333333334,
            "totalA": 0.7008333333333334,
            "upperA": 0.7008333333333334
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      },
      "rated": {
        "complete": true,
        "knownSubtotalA": 2.4408333333333334,
        "totalA": 2.4408333333333334,
        "upperA": 2.4408333333333334,
        "paths": [
          {
            "id": "source",
            "complete": true,
            "knownSubtotalA": 2.4408333333333334,
            "totalA": 2.4408333333333334,
            "upperA": 2.4408333333333334
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      },
      "stall": {
        "complete": true,
        "knownSubtotalA": 16.720833333333335,
        "totalA": 16.720833333333335,
        "upperA": 18.340833333333336,
        "paths": [
          {
            "id": "source",
            "complete": true,
            "knownSubtotalA": 16.720833333333335,
            "totalA": 16.720833333333335,
            "upperA": 18.340833333333336
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      }
    },
    "paths": [
      {
        "id": "source",
        "label": "Declared 12 V source and servo branch",
        "parentId": null,
        "voltage": {
          "minV": 12,
          "maxV": 12
        },
        "knownComponentLimitA": 5,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 0.7008333333333334,
            "totalA": 0.7008333333333334,
            "upperA": 0.7008333333333334
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 2.4408333333333334,
            "totalA": 2.4408333333333334,
            "upperA": 2.4408333333333334
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 16.720833333333335,
            "totalA": 16.720833333333335,
            "upperA": 18.340833333333336
          }
        }
      },
      {
        "id": "logic",
        "label": "Declared 5 V converter output",
        "parentId": "source",
        "voltage": {
          "minV": 5,
          "maxV": 5
        },
        "knownComponentLimitA": 2,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        }
      }
    ],
    "bom": [
      [
        "role",
        "path",
        "component",
        "quantity",
        "productId",
        "variantId",
        "sourceRefs",
        "verification"
      ],
      [
        "servo",
        "source",
        "Feetech STS3215-C018",
        6,
        "lerobot-sts3215",
        "sts3215-c018",
        "c018-a0",
        "offline-configuration; hardware unverified"
      ],
      [
        "path component",
        "source",
        "Waveshare Bus Servo Adapter (A)",
        1,
        "lerobot-bus-adapter",
        "waveshare-bus-adapter-a",
        "waveshare-faq",
        "component rating only; assembled path unverified"
      ],
      [
        "logic load",
        "logic",
        "Arduino UNO Q",
        1,
        "uno-q-2gb",
        "abx00162",
        "unoq-r16;luwu-v11",
        "declared load; hardware unverified"
      ]
    ],
    "runtimeHours": null,
    "assumptions": [
      {
        "fieldPath": "paths.source.limitA",
        "value": 5,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration: 5 A source/path; no assembled-path test."
      },
      {
        "fieldPath": "paths.logic.limitA",
        "value": 2,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified."
      },
      {
        "fieldPath": "loads.0.currentA",
        "evidence": "user-supplied",
        "value": 1,
        "unit": "A"
      }
    ],
    "checklist": [
      "confirm_revision",
      "confirm_polarity",
      "measure_rails",
      "single_servo",
      "scan_ids",
      "support_robot"
    ]
  }
}

이 예제로 확인할 수 없는 사항

  • 설계를 12 V로 바꾸면 별도의 선언 시나리오가 되며 8.4 V의 근거가 되지는 않습니다.
  • 이 C018 사례는 C001의 5 V 최소 전압 자료 충돌을 해결하지 않습니다.

기준 자료 작성일:

사양 출처

아래 링크에는 기술 자료의 원래 제목을 표시합니다. 예제의 전제 조건과 함께 버전 및 확인일을 확인하세요.

문의하기