Microduck Robot●microduck-robot.com
工具

机器人供电与 BOM 检查

操作硬件之前,先比较供电路径与零件清单。

正在载入工具…

核对机器人供电路径与 BOM

将声明的电气配置与已知元件数据对照。电源电压、降压输出和舵机电流规格点应分别填写。

机器人预设

  • SO-101 leader
  • SO-101 follower
  • Microduck UNO Q / V1.1

规则版本: 2026-11-12.2

填写电压与电流依据

电源最小、最大电压以 V 表示,电流限制以 A 表示。填写舵机数量、同时动作数量及电流规格的测试电压。自订电机电流须附测量或来源说明;未知值不会自动补齐。

选配件前先检查路径

  1. 选择预设,核对电源、降压、主板和各舵机支路,并确认实际输入端口及极性。
  2. 填写已知的整条路径限制及依据;降压路径还需填写输出电压和已知效率。
  3. 分别比较待机、声明的连续负载及全部堵转情境,再阅读检查项与首次上电清单。

可保存的工程资料

可保存项目与 JSON 报告,或导出带商品/变体引用的 BOM CSV。已知小计不代表完整负载。配件链接不会自动下单,也不会改动价格。

离线供电检查的边界

电流数据只适用于声明的电压点,工具不会插值。连续负载超额会阻挡该情境,堵转超额则标出风险。连接器或保险丝标称不能证明整条路径的承载能力;电池容量也不能单独推算整机续航或证明实物安全。

供电路径完整计算案例

跟随三个离线案例,从声明输入读到引擎报告。电源、降压、路径限值和主板负载都是合成用户声明,并非实测;舵机电流只使用明确的电压规格点。

离线配置检查不代表真实硬件或安全性已验证。 这些合成案例与上方表单中输入的配置相互独立。导入案例后会重新检查输入,不直接采用已保存的结论。

降压前后不能直接相加电流

5 V负载能直接加到12 V舵机电流上吗?

适用版本: Microduck electrical rules 2026-11-12.2 · Robot profile SO-101 follower / LeRobot 0.7.0 · C018 current specification A/0 2023-07-20, 12 V test point

输入条件与操作步骤

声明12 V / 4 A、一个处于12 V规格点的C018、效率0.8的5 V降压、2 A输出路径上限,以及UNO Q USB的1 A负载。

  1. 将12 V舵机支路和5 V逻辑支路分开。
  2. 把逻辑负载换算到源端:5 × 1 / (12 × 0.8)。
  3. 分别加到各电流情境,再按各路径电压比较限值。

参考检查结果

未发现已知配置冲突

源端待机/声明连续负载/全部堵转约为0.550833 / 1.420833 / 3.220833 A;+10%堵转上界为3.490833 A,与声明的4 A未发现已知冲突。

查看输入与参考结果 JSON
{
  "inputs": {
    "profileId": "so101-follower-v0.7.0",
    "supply": {
      "minV": 12,
      "maxV": 12,
      "continuousA": 4,
      "capacityMah": null,
      "nominalV": null,
      "chemistry": "external-dc",
      "polarityConfirmed": true
    },
    "paths": [
      {
        "id": "source",
        "label": "12 V source and servo branch",
        "parentId": null,
        "mode": "pass",
        "componentIds": [
          "waveshare-adapter-a"
        ],
        "limitA": 4,
        "limitSource": "Synthetic user declaration for this reference case: 4 A assembled-path limit; not a measurement.",
        "assembledVerified": false
      },
      {
        "id": "logic",
        "label": "Declared 5 V converter output",
        "parentId": "source",
        "mode": "regulated",
        "componentIds": [],
        "outputMinV": 5,
        "outputMaxV": 5,
        "efficiency": 0.8,
        "limitA": 2,
        "limitSource": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified.",
        "assembledVerified": false
      }
    ],
    "motors": [
      {
        "componentId": "sts3215-c018",
        "pathId": "source",
        "count": 1,
        "activeCount": 1,
        "performanceV": 12
      }
    ],
    "loads": [
      {
        "id": "uno-q",
        "componentId": "uno-q",
        "pathId": "logic",
        "port": "usb",
        "count": 1,
        "currentA": 1
      }
    ]
  },
  "status": "no_known_conflict",
  "findings": [],
  "outputs": {
    "scenarios": {
      "idle": {
        "complete": true,
        "knownSubtotalA": 0.5508333333333334,
        "totalA": 0.5508333333333334,
        "upperA": 0.5508333333333334,
        "paths": [
          {
            "id": "source",
            "complete": true,
            "knownSubtotalA": 0.5508333333333334,
            "totalA": 0.5508333333333334,
            "upperA": 0.5508333333333334
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      },
      "rated": {
        "complete": true,
        "knownSubtotalA": 1.4208333333333334,
        "totalA": 1.4208333333333334,
        "upperA": 1.4208333333333334,
        "paths": [
          {
            "id": "source",
            "complete": true,
            "knownSubtotalA": 1.4208333333333334,
            "totalA": 1.4208333333333334,
            "upperA": 1.4208333333333334
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      },
      "stall": {
        "complete": true,
        "knownSubtotalA": 3.2208333333333337,
        "totalA": 3.2208333333333337,
        "upperA": 3.490833333333334,
        "paths": [
          {
            "id": "source",
            "complete": true,
            "knownSubtotalA": 3.2208333333333337,
            "totalA": 3.2208333333333337,
            "upperA": 3.490833333333334
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      }
    },
    "paths": [
      {
        "id": "source",
        "label": "12 V source and servo branch",
        "parentId": null,
        "voltage": {
          "minV": 12,
          "maxV": 12
        },
        "knownComponentLimitA": 4,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 0.5508333333333334,
            "totalA": 0.5508333333333334,
            "upperA": 0.5508333333333334
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 1.4208333333333334,
            "totalA": 1.4208333333333334,
            "upperA": 1.4208333333333334
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 3.2208333333333337,
            "totalA": 3.2208333333333337,
            "upperA": 3.490833333333334
          }
        }
      },
      {
        "id": "logic",
        "label": "Declared 5 V converter output",
        "parentId": "source",
        "voltage": {
          "minV": 5,
          "maxV": 5
        },
        "knownComponentLimitA": 2,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        }
      }
    ],
    "bom": [
      [
        "role",
        "path",
        "component",
        "quantity",
        "productId",
        "variantId",
        "sourceRefs",
        "verification"
      ],
      [
        "servo",
        "source",
        "Feetech STS3215-C018",
        1,
        "lerobot-sts3215",
        "sts3215-c018",
        "c018-a0",
        "offline-configuration; hardware unverified"
      ],
      [
        "path component",
        "source",
        "Waveshare Bus Servo Adapter (A)",
        1,
        "lerobot-bus-adapter",
        "waveshare-bus-adapter-a",
        "waveshare-faq",
        "component rating only; assembled path unverified"
      ],
      [
        "logic load",
        "logic",
        "Arduino UNO Q",
        1,
        "uno-q-2gb",
        "abx00162",
        "unoq-r16;luwu-v11",
        "declared load; hardware unverified"
      ]
    ],
    "runtimeHours": null,
    "assumptions": [
      {
        "fieldPath": "paths.source.limitA",
        "value": 4,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration for this reference case: 4 A assembled-path limit; not a measurement."
      },
      {
        "fieldPath": "paths.logic.limitA",
        "value": 2,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified."
      },
      {
        "fieldPath": "loads.0.currentA",
        "evidence": "user-supplied",
        "value": 1,
        "unit": "A"
      }
    ],
    "checklist": [
      "confirm_revision",
      "confirm_polarity",
      "measure_rails",
      "single_servo",
      "scan_ids",
      "support_robot"
    ]
  }
}

本案例尚不能证明的事项

  • 限值、效率、负载和极性确认都是示例声明;这只是单舵机支路,不是已验证的整臂。
  • 元件额定不能证明整条装配路径的承载能力,也没有验证实物安全或续航。

参考案例制作日期:

规格资料来源

下列链接保留技术资料的原文标题。请结合案例假设,核对资料版本及核对日期。

连续负载超额仍会阻挡

声明5 A能覆盖六个C018同时动作吗?

适用版本: Microduck electrical rules 2026-11-12.2 · Robot profile SO-101 follower / LeRobot 0.7.0 · C018 current specification A/0 2023-07-20, 12 V test point

输入条件与操作步骤

采用官方12 V电流点、六个舵机全部动作,并合成声明电源及路径上限为5 A。

  1. 连续需求为6 × 0.9 = 5.4 A。
  2. 另看全部堵转:标称16.2 A,+10%上界17.82 A。
  3. 只把声明的同时动作数改为两个,再次检查。

参考检查结果

此配置不可使用

5.4 A超过5 A,因此声明的连续情境被阻挡;堵转超额另列为待核对风险。

查看输入与参考结果 JSON
{
  "inputs": {
    "profileId": "so101-follower-v0.7.0",
    "supply": {
      "minV": 12,
      "maxV": 12,
      "continuousA": 5,
      "capacityMah": null,
      "nominalV": null,
      "chemistry": "external-dc",
      "polarityConfirmed": true
    },
    "paths": [
      {
        "id": "servo",
        "label": "12 V adapter and harness",
        "parentId": null,
        "mode": "pass",
        "componentIds": [
          "waveshare-adapter-a"
        ],
        "limitA": 5,
        "limitSource": "Synthetic user declaration for this case: 5 A source and path; not a measured harness rating.",
        "assembledVerified": false
      }
    ],
    "motors": [
      {
        "componentId": "sts3215-c018",
        "pathId": "servo",
        "count": 6,
        "activeCount": 6,
        "performanceV": 12
      }
    ],
    "loads": []
  },
  "status": "blocked",
  "findings": [
    {
      "code": "continuous_over_limit",
      "severity": "blocked",
      "fieldPath": "paths.servo",
      "messageKey": "continuous_over_limit",
      "details": {
        "scenario": "rated",
        "current": 5.4,
        "limit": 5,
        "path": "12 V adapter and harness"
      },
      "sourceRef": null
    },
    {
      "code": "stall_over_limit",
      "severity": "needs_review",
      "fieldPath": "paths.servo",
      "messageKey": "stall_over_limit",
      "details": {
        "scenario": "stall",
        "current": 17.82,
        "limit": 5,
        "path": "12 V adapter and harness"
      },
      "sourceRef": null
    },
    {
      "code": "continuous_over_limit",
      "severity": "blocked",
      "fieldPath": "supply.continuousA",
      "messageKey": "continuous_over_limit",
      "details": {
        "scenario": "rated",
        "current": 5.4,
        "limit": 5,
        "path": "supply"
      },
      "sourceRef": null
    },
    {
      "code": "stall_over_limit",
      "severity": "needs_review",
      "fieldPath": "supply.continuousA",
      "messageKey": "stall_over_limit",
      "details": {
        "scenario": "stall",
        "current": 17.82,
        "limit": 5,
        "path": "supply"
      },
      "sourceRef": null
    }
  ],
  "outputs": {
    "scenarios": {
      "idle": {
        "complete": true,
        "knownSubtotalA": 0.18,
        "totalA": 0.18,
        "upperA": 0.18,
        "paths": [
          {
            "id": "servo",
            "complete": true,
            "knownSubtotalA": 0.18,
            "totalA": 0.18,
            "upperA": 0.18
          }
        ]
      },
      "rated": {
        "complete": true,
        "knownSubtotalA": 5.4,
        "totalA": 5.4,
        "upperA": 5.4,
        "paths": [
          {
            "id": "servo",
            "complete": true,
            "knownSubtotalA": 5.4,
            "totalA": 5.4,
            "upperA": 5.4
          }
        ]
      },
      "stall": {
        "complete": true,
        "knownSubtotalA": 16.200000000000003,
        "totalA": 16.200000000000003,
        "upperA": 17.820000000000004,
        "paths": [
          {
            "id": "servo",
            "complete": true,
            "knownSubtotalA": 16.200000000000003,
            "totalA": 16.200000000000003,
            "upperA": 17.820000000000004
          }
        ]
      }
    },
    "paths": [
      {
        "id": "servo",
        "label": "12 V adapter and harness",
        "parentId": null,
        "voltage": {
          "minV": 12,
          "maxV": 12
        },
        "knownComponentLimitA": 5,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 0.18,
            "totalA": 0.18,
            "upperA": 0.18
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 5.4,
            "totalA": 5.4,
            "upperA": 5.4
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 16.200000000000003,
            "totalA": 16.200000000000003,
            "upperA": 17.820000000000004
          }
        }
      }
    ],
    "bom": [
      [
        "role",
        "path",
        "component",
        "quantity",
        "productId",
        "variantId",
        "sourceRefs",
        "verification"
      ],
      [
        "servo",
        "servo",
        "Feetech STS3215-C018",
        6,
        "lerobot-sts3215",
        "sts3215-c018",
        "c018-a0",
        "offline-configuration; hardware unverified"
      ],
      [
        "path component",
        "servo",
        "Waveshare Bus Servo Adapter (A)",
        1,
        "lerobot-bus-adapter",
        "waveshare-bus-adapter-a",
        "waveshare-faq",
        "component rating only; assembled path unverified"
      ]
    ],
    "runtimeHours": null,
    "assumptions": [
      {
        "fieldPath": "paths.servo.limitA",
        "value": 5,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration for this case: 5 A source and path; not a measured harness rating."
      }
    ],
    "checklist": [
      "confirm_revision",
      "confirm_polarity",
      "measure_rails",
      "single_servo",
      "scan_ids",
      "support_robot"
    ]
  }
}

调整后重新检查

两个动作加四个待机为1.92 A,但全部堵转仍是16.2 A、上界17.82 A;调整后仍需核对。

需要进一步核对

查看调整后的参考 JSON
{
  "inputs": {
    "profileId": "so101-follower-v0.7.0",
    "supply": {
      "minV": 12,
      "maxV": 12,
      "continuousA": 5,
      "capacityMah": null,
      "nominalV": null,
      "chemistry": "external-dc",
      "polarityConfirmed": true
    },
    "paths": [
      {
        "id": "servo",
        "label": "12 V adapter and harness",
        "parentId": null,
        "mode": "pass",
        "componentIds": [
          "waveshare-adapter-a"
        ],
        "limitA": 5,
        "limitSource": "Synthetic user declaration for this case: 5 A source and path; not a measured harness rating.",
        "assembledVerified": false
      }
    ],
    "motors": [
      {
        "componentId": "sts3215-c018",
        "pathId": "servo",
        "count": 6,
        "activeCount": 2,
        "performanceV": 12
      }
    ],
    "loads": []
  },
  "status": "needs_review",
  "findings": [
    {
      "code": "stall_over_limit",
      "severity": "needs_review",
      "fieldPath": "paths.servo",
      "messageKey": "stall_over_limit",
      "details": {
        "scenario": "stall",
        "current": 17.82,
        "limit": 5,
        "path": "12 V adapter and harness"
      },
      "sourceRef": null
    },
    {
      "code": "stall_over_limit",
      "severity": "needs_review",
      "fieldPath": "supply.continuousA",
      "messageKey": "stall_over_limit",
      "details": {
        "scenario": "stall",
        "current": 17.82,
        "limit": 5,
        "path": "supply"
      },
      "sourceRef": null
    }
  ],
  "outputs": {
    "scenarios": {
      "idle": {
        "complete": true,
        "knownSubtotalA": 0.18,
        "totalA": 0.18,
        "upperA": 0.18,
        "paths": [
          {
            "id": "servo",
            "complete": true,
            "knownSubtotalA": 0.18,
            "totalA": 0.18,
            "upperA": 0.18
          }
        ]
      },
      "rated": {
        "complete": true,
        "knownSubtotalA": 1.92,
        "totalA": 1.92,
        "upperA": 1.92,
        "paths": [
          {
            "id": "servo",
            "complete": true,
            "knownSubtotalA": 1.92,
            "totalA": 1.92,
            "upperA": 1.92
          }
        ]
      },
      "stall": {
        "complete": true,
        "knownSubtotalA": 16.200000000000003,
        "totalA": 16.200000000000003,
        "upperA": 17.820000000000004,
        "paths": [
          {
            "id": "servo",
            "complete": true,
            "knownSubtotalA": 16.200000000000003,
            "totalA": 16.200000000000003,
            "upperA": 17.820000000000004
          }
        ]
      }
    },
    "paths": [
      {
        "id": "servo",
        "label": "12 V adapter and harness",
        "parentId": null,
        "voltage": {
          "minV": 12,
          "maxV": 12
        },
        "knownComponentLimitA": 5,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 0.18,
            "totalA": 0.18,
            "upperA": 0.18
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 1.92,
            "totalA": 1.92,
            "upperA": 1.92
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 16.200000000000003,
            "totalA": 16.200000000000003,
            "upperA": 17.820000000000004
          }
        }
      }
    ],
    "bom": [
      [
        "role",
        "path",
        "component",
        "quantity",
        "productId",
        "variantId",
        "sourceRefs",
        "verification"
      ],
      [
        "servo",
        "servo",
        "Feetech STS3215-C018",
        6,
        "lerobot-sts3215",
        "sts3215-c018",
        "c018-a0",
        "offline-configuration; hardware unverified"
      ],
      [
        "path component",
        "servo",
        "Waveshare Bus Servo Adapter (A)",
        1,
        "lerobot-bus-adapter",
        "waveshare-bus-adapter-a",
        "waveshare-faq",
        "component rating only; assembled path unverified"
      ]
    ],
    "runtimeHours": null,
    "assumptions": [
      {
        "fieldPath": "paths.servo.limitA",
        "value": 5,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration for this case: 5 A source and path; not a measured harness rating."
      }
    ],
    "checklist": [
      "confirm_revision",
      "confirm_polarity",
      "measure_rails",
      "single_servo",
      "scan_ids",
      "support_robot"
    ]
  }
}

本案例尚不能证明的事项

  • 声明较少动作数,不等于固件会限制同时动作或电流。
  • 转接板5 A上限不是自动限流,也不是线束承载证明。

参考案例制作日期:

规格资料来源

下列链接保留技术资料的原文标题。请结合案例假设,核对资料版本及核对日期。

已知小计不是总电流

12 V的电流点能直接用于8.4 V吗?

适用版本: Microduck electrical rules 2026-11-12.2 · Robot profile SO-101 follower / LeRobot 0.7.0 · C018 current specification A/0 2023-07-20, 12 V test point

输入条件与操作步骤

声明8.4 V、六个C018中两个动作、效率0.8的5 V降压和1 A合成主板负载;电源及路径上限为5 A。

  1. 区分工作电压范围与电流测试点。
  2. C018在8.4 V的电流保持未知,不做插值。
  3. 只计已知逻辑支路:5 × 1 / (8.4 × 0.8)。

参考检查结果

需要进一步核对

约0.744048 A只是源端已知小计;舵机需求、总电流、上界及续航都保持未知。

查看输入与参考结果 JSON
{
  "inputs": {
    "profileId": "so101-follower-v0.7.0",
    "supply": {
      "minV": 8.4,
      "maxV": 8.4,
      "continuousA": 5,
      "capacityMah": null,
      "nominalV": null,
      "chemistry": "external-dc",
      "polarityConfirmed": true
    },
    "paths": [
      {
        "id": "source",
        "label": "Declared 8.4 V source and servo branch",
        "parentId": null,
        "mode": "pass",
        "componentIds": [
          "waveshare-adapter-a"
        ],
        "limitA": 5,
        "limitSource": "Synthetic user declaration: 5 A source/path; no assembled-path test.",
        "assembledVerified": false
      },
      {
        "id": "logic",
        "label": "Declared 5 V converter output",
        "parentId": "source",
        "mode": "regulated",
        "componentIds": [],
        "outputMinV": 5,
        "outputMaxV": 5,
        "efficiency": 0.8,
        "limitA": 2,
        "limitSource": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified.",
        "assembledVerified": false
      }
    ],
    "motors": [
      {
        "componentId": "sts3215-c018",
        "pathId": "source",
        "count": 6,
        "activeCount": 2,
        "performanceV": 8.4
      }
    ],
    "loads": [
      {
        "id": "uno-q",
        "componentId": "uno-q",
        "pathId": "logic",
        "port": "usb",
        "count": 1,
        "currentA": 1
      }
    ]
  },
  "status": "needs_review",
  "findings": [
    {
      "code": "current_unknown",
      "severity": "needs_review",
      "fieldPath": "motors.0",
      "messageKey": "current_unknown",
      "details": {
        "component": "Feetech STS3215-C018",
        "voltage": 8.4
      },
      "sourceRef": "c018-a0"
    }
  ],
  "outputs": {
    "scenarios": {
      "idle": {
        "complete": false,
        "knownSubtotalA": 0.744047619047619,
        "totalA": null,
        "upperA": null,
        "paths": [
          {
            "id": "source",
            "complete": false,
            "knownSubtotalA": 0.744047619047619,
            "totalA": null,
            "upperA": null
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      },
      "rated": {
        "complete": false,
        "knownSubtotalA": 0.744047619047619,
        "totalA": null,
        "upperA": null,
        "paths": [
          {
            "id": "source",
            "complete": false,
            "knownSubtotalA": 0.744047619047619,
            "totalA": null,
            "upperA": null
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      },
      "stall": {
        "complete": false,
        "knownSubtotalA": 0.744047619047619,
        "totalA": null,
        "upperA": null,
        "paths": [
          {
            "id": "source",
            "complete": false,
            "knownSubtotalA": 0.744047619047619,
            "totalA": null,
            "upperA": null
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      }
    },
    "paths": [
      {
        "id": "source",
        "label": "Declared 8.4 V source and servo branch",
        "parentId": null,
        "voltage": {
          "minV": 8.4,
          "maxV": 8.4
        },
        "knownComponentLimitA": 5,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": false,
            "knownSubtotalA": 0.744047619047619,
            "totalA": null,
            "upperA": null
          },
          "rated": {
            "complete": false,
            "knownSubtotalA": 0.744047619047619,
            "totalA": null,
            "upperA": null
          },
          "stall": {
            "complete": false,
            "knownSubtotalA": 0.744047619047619,
            "totalA": null,
            "upperA": null
          }
        }
      },
      {
        "id": "logic",
        "label": "Declared 5 V converter output",
        "parentId": "source",
        "voltage": {
          "minV": 5,
          "maxV": 5
        },
        "knownComponentLimitA": 2,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        }
      }
    ],
    "bom": [
      [
        "role",
        "path",
        "component",
        "quantity",
        "productId",
        "variantId",
        "sourceRefs",
        "verification"
      ],
      [
        "servo",
        "source",
        "Feetech STS3215-C018",
        6,
        "lerobot-sts3215",
        "sts3215-c018",
        "c018-a0",
        "offline-configuration; hardware unverified"
      ],
      [
        "path component",
        "source",
        "Waveshare Bus Servo Adapter (A)",
        1,
        "lerobot-bus-adapter",
        "waveshare-bus-adapter-a",
        "waveshare-faq",
        "component rating only; assembled path unverified"
      ],
      [
        "logic load",
        "logic",
        "Arduino UNO Q",
        1,
        "uno-q-2gb",
        "abx00162",
        "unoq-r16;luwu-v11",
        "declared load; hardware unverified"
      ]
    ],
    "runtimeHours": null,
    "assumptions": [
      {
        "fieldPath": "paths.source.limitA",
        "value": 5,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration: 5 A source/path; no assembled-path test."
      },
      {
        "fieldPath": "paths.logic.limitA",
        "value": 2,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified."
      },
      {
        "fieldPath": "loads.0.currentA",
        "evidence": "user-supplied",
        "value": 1,
        "unit": "A"
      }
    ],
    "checklist": [
      "confirm_revision",
      "confirm_polarity",
      "measure_rails",
      "single_servo",
      "scan_ids",
      "support_robot"
    ]
  }
}

调整后重新检查

另选12 V规格点后,源端声明连续负载约2.440833 A,堵转上界为18.340833 A;因此调整报告仍需核对。

需要进一步核对

查看调整后的参考 JSON
{
  "inputs": {
    "profileId": "so101-follower-v0.7.0",
    "supply": {
      "minV": 12,
      "maxV": 12,
      "continuousA": 5,
      "capacityMah": null,
      "nominalV": null,
      "chemistry": "external-dc",
      "polarityConfirmed": true
    },
    "paths": [
      {
        "id": "source",
        "label": "Declared 12 V source and servo branch",
        "parentId": null,
        "mode": "pass",
        "componentIds": [
          "waveshare-adapter-a"
        ],
        "limitA": 5,
        "limitSource": "Synthetic user declaration: 5 A source/path; no assembled-path test.",
        "assembledVerified": false
      },
      {
        "id": "logic",
        "label": "Declared 5 V converter output",
        "parentId": "source",
        "mode": "regulated",
        "componentIds": [],
        "outputMinV": 5,
        "outputMaxV": 5,
        "efficiency": 0.8,
        "limitA": 2,
        "limitSource": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified.",
        "assembledVerified": false
      }
    ],
    "motors": [
      {
        "componentId": "sts3215-c018",
        "pathId": "source",
        "count": 6,
        "activeCount": 2,
        "performanceV": 12
      }
    ],
    "loads": [
      {
        "id": "uno-q",
        "componentId": "uno-q",
        "pathId": "logic",
        "port": "usb",
        "count": 1,
        "currentA": 1
      }
    ]
  },
  "status": "needs_review",
  "findings": [
    {
      "code": "stall_over_limit",
      "severity": "needs_review",
      "fieldPath": "paths.source",
      "messageKey": "stall_over_limit",
      "details": {
        "scenario": "stall",
        "current": 18.341,
        "limit": 5,
        "path": "Declared 12 V source and servo branch"
      },
      "sourceRef": null
    },
    {
      "code": "stall_over_limit",
      "severity": "needs_review",
      "fieldPath": "supply.continuousA",
      "messageKey": "stall_over_limit",
      "details": {
        "scenario": "stall",
        "current": 18.341,
        "limit": 5,
        "path": "supply"
      },
      "sourceRef": null
    }
  ],
  "outputs": {
    "scenarios": {
      "idle": {
        "complete": true,
        "knownSubtotalA": 0.7008333333333334,
        "totalA": 0.7008333333333334,
        "upperA": 0.7008333333333334,
        "paths": [
          {
            "id": "source",
            "complete": true,
            "knownSubtotalA": 0.7008333333333334,
            "totalA": 0.7008333333333334,
            "upperA": 0.7008333333333334
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      },
      "rated": {
        "complete": true,
        "knownSubtotalA": 2.4408333333333334,
        "totalA": 2.4408333333333334,
        "upperA": 2.4408333333333334,
        "paths": [
          {
            "id": "source",
            "complete": true,
            "knownSubtotalA": 2.4408333333333334,
            "totalA": 2.4408333333333334,
            "upperA": 2.4408333333333334
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      },
      "stall": {
        "complete": true,
        "knownSubtotalA": 16.720833333333335,
        "totalA": 16.720833333333335,
        "upperA": 18.340833333333336,
        "paths": [
          {
            "id": "source",
            "complete": true,
            "knownSubtotalA": 16.720833333333335,
            "totalA": 16.720833333333335,
            "upperA": 18.340833333333336
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      }
    },
    "paths": [
      {
        "id": "source",
        "label": "Declared 12 V source and servo branch",
        "parentId": null,
        "voltage": {
          "minV": 12,
          "maxV": 12
        },
        "knownComponentLimitA": 5,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 0.7008333333333334,
            "totalA": 0.7008333333333334,
            "upperA": 0.7008333333333334
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 2.4408333333333334,
            "totalA": 2.4408333333333334,
            "upperA": 2.4408333333333334
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 16.720833333333335,
            "totalA": 16.720833333333335,
            "upperA": 18.340833333333336
          }
        }
      },
      {
        "id": "logic",
        "label": "Declared 5 V converter output",
        "parentId": "source",
        "voltage": {
          "minV": 5,
          "maxV": 5
        },
        "knownComponentLimitA": 2,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        }
      }
    ],
    "bom": [
      [
        "role",
        "path",
        "component",
        "quantity",
        "productId",
        "variantId",
        "sourceRefs",
        "verification"
      ],
      [
        "servo",
        "source",
        "Feetech STS3215-C018",
        6,
        "lerobot-sts3215",
        "sts3215-c018",
        "c018-a0",
        "offline-configuration; hardware unverified"
      ],
      [
        "path component",
        "source",
        "Waveshare Bus Servo Adapter (A)",
        1,
        "lerobot-bus-adapter",
        "waveshare-bus-adapter-a",
        "waveshare-faq",
        "component rating only; assembled path unverified"
      ],
      [
        "logic load",
        "logic",
        "Arduino UNO Q",
        1,
        "uno-q-2gb",
        "abx00162",
        "unoq-r16;luwu-v11",
        "declared load; hardware unverified"
      ]
    ],
    "runtimeHours": null,
    "assumptions": [
      {
        "fieldPath": "paths.source.limitA",
        "value": 5,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration: 5 A source/path; no assembled-path test."
      },
      {
        "fieldPath": "paths.logic.limitA",
        "value": 2,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified."
      },
      {
        "fieldPath": "loads.0.currentA",
        "evidence": "user-supplied",
        "value": 1,
        "unit": "A"
      }
    ],
    "checklist": [
      "confirm_revision",
      "confirm_polarity",
      "measure_rails",
      "single_servo",
      "scan_ids",
      "support_robot"
    ]
  }
}

本案例尚不能证明的事项

  • 改成12 V是另一个声明设计,不能证明8.4 V电流。
  • 本C018案例没有解决C001在5 V的最低电压资料冲突。

参考案例制作日期:

规格资料来源

下列链接保留技术资料的原文标题。请结合案例假设,核对资料版本及核对日期。

联系我们