Microduck Robot●microduck-robot.com
Công cụ

Kiểm tra nguồn điện và BOM

So sánh đường cấp nguồn và danh sách linh kiện trước khi thao tác phần cứng.

Đang tải công cụ…

Kiểm tra đường nguồn và BOM robot

Đối chiếu cấu hình điện đã khai báo với dữ liệu linh kiện. Tách điện áp nguồn, đầu ra bộ đổi và điểm điện áp của thông số dòng servo.

Cấu hình robot có sẵn

  • SO-101 leader
  • SO-101 follower
  • Microduck UNO Q / V1.1

Phiên bản quy tắc: 2026-11-12.2

Khai báo điện áp và căn cứ dòng

Nhập điện áp nhỏ nhất/lớn nhất bằng V và giới hạn dòng bằng A. Nêu số servo, số hoạt động đồng thời và điện áp thử dòng. Dòng động cơ tự cung cấp cần ghi chú đo hoặc nguồn; dữ liệu chưa biết không được tự điền.

Kiểm tra đường cấp điện

  1. Chọn cấu hình và kiểm tra nguồn, bộ đổi, bo điều khiển, nhánh servo, cổng vào và cực tính thực tế.
  2. Nhập giới hạn toàn đường và căn cứ; thêm điện áp ra và hiệu suất đã biết của bộ đổi.
  3. So sánh nghỉ, tải liên tục khai báo và kẹt toàn bộ servo, rồi đọc danh sách cấp nguồn đầu tiên.

Tài liệu dự án

Lưu dự án và báo cáo JSON hoặc xuất BOM CSV có tham chiếu sản phẩm/biến thể. Tổng phần đã biết không phải toàn bộ tải. Liên kết không tự đặt hàng hay đổi giá.

Giới hạn ước tính

Dòng chỉ áp dụng tại điện áp nêu rõ, không nội suy. Quá tải liên tục chặn tình huống đó; dòng kẹt vượt mức được ghi là rủi ro. Nhãn đầu nối hay cầu chì không chứng nhận toàn đường đã lắp. Dung lượng pin không tự xác định thời gian chạy hay an toàn vật lý.

Ví dụ đầy đủ về đường cấp nguồn

Theo dõi ba phép tính ngoại tuyến từ đầu vào khai báo đến báo cáo. Nguồn, bộ chuyển đổi, giới hạn đường dây và tải bo đều là giá trị giả định do người dùng khai báo, không phải số đo. Dòng servo chỉ dùng tại điểm điện áp đã nêu.

Kiểm tra cục bộ không xác minh phần cứng thực hay độ an toàn. Các ví dụ tổng hợp này tách biệt với thông số bạn nhập ở trên. Khi nhập một ví dụ, công cụ sẽ kiểm tra lại đầu vào thay vì tin vào kết luận đã lưu.

Bộ chuyển đổi làm thay đổi dòng phía nguồn

Có thể cộng thẳng tải 5 V vào dòng servo 12 V không?

Phiên bản áp dụng: Microduck electrical rules 2026-11-12.2 · Robot profile SO-101 follower / LeRobot 0.7.0 · C018 current specification A/0 2023-07-20, 12 V test point

Dữ liệu đầu vào và các bước

Khai báo 12 V / 4 A, một C018 ở điểm 12 V, bộ chuyển đổi 5 V hiệu suất 0.8, giới hạn đầu ra 2 A và tải UNO Q USB 1 A.

  1. Tách nhánh servo 12 V khỏi nhánh logic 5 V.
  2. Quy đổi tải logic về phía nguồn: 5 × 1 / (12 × 0.8).
  3. Cộng dòng đầu vào cho từng tình huống rồi so với giới hạn của từng nhánh.

Kết quả kiểm tra tham chiếu

Chưa thấy xung đột cấu hình

Dòng nguồn khi chờ/định mức/kẹt trục xấp xỉ 0.550833 / 1.420833 / 3.220833 A. Biên trên khi kẹt với +10% là 3.490833 A, không có xung đột đã biết với mức 4 A khai báo.

Xem đầu vào và JSON tham chiếu
{
  "inputs": {
    "profileId": "so101-follower-v0.7.0",
    "supply": {
      "minV": 12,
      "maxV": 12,
      "continuousA": 4,
      "capacityMah": null,
      "nominalV": null,
      "chemistry": "external-dc",
      "polarityConfirmed": true
    },
    "paths": [
      {
        "id": "source",
        "label": "12 V source and servo branch",
        "parentId": null,
        "mode": "pass",
        "componentIds": [
          "waveshare-adapter-a"
        ],
        "limitA": 4,
        "limitSource": "Synthetic user declaration for this reference case: 4 A assembled-path limit; not a measurement.",
        "assembledVerified": false
      },
      {
        "id": "logic",
        "label": "Declared 5 V converter output",
        "parentId": "source",
        "mode": "regulated",
        "componentIds": [],
        "outputMinV": 5,
        "outputMaxV": 5,
        "efficiency": 0.8,
        "limitA": 2,
        "limitSource": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified.",
        "assembledVerified": false
      }
    ],
    "motors": [
      {
        "componentId": "sts3215-c018",
        "pathId": "source",
        "count": 1,
        "activeCount": 1,
        "performanceV": 12
      }
    ],
    "loads": [
      {
        "id": "uno-q",
        "componentId": "uno-q",
        "pathId": "logic",
        "port": "usb",
        "count": 1,
        "currentA": 1
      }
    ]
  },
  "status": "no_known_conflict",
  "findings": [],
  "outputs": {
    "scenarios": {
      "idle": {
        "complete": true,
        "knownSubtotalA": 0.5508333333333334,
        "totalA": 0.5508333333333334,
        "upperA": 0.5508333333333334,
        "paths": [
          {
            "id": "source",
            "complete": true,
            "knownSubtotalA": 0.5508333333333334,
            "totalA": 0.5508333333333334,
            "upperA": 0.5508333333333334
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      },
      "rated": {
        "complete": true,
        "knownSubtotalA": 1.4208333333333334,
        "totalA": 1.4208333333333334,
        "upperA": 1.4208333333333334,
        "paths": [
          {
            "id": "source",
            "complete": true,
            "knownSubtotalA": 1.4208333333333334,
            "totalA": 1.4208333333333334,
            "upperA": 1.4208333333333334
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      },
      "stall": {
        "complete": true,
        "knownSubtotalA": 3.2208333333333337,
        "totalA": 3.2208333333333337,
        "upperA": 3.490833333333334,
        "paths": [
          {
            "id": "source",
            "complete": true,
            "knownSubtotalA": 3.2208333333333337,
            "totalA": 3.2208333333333337,
            "upperA": 3.490833333333334
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      }
    },
    "paths": [
      {
        "id": "source",
        "label": "12 V source and servo branch",
        "parentId": null,
        "voltage": {
          "minV": 12,
          "maxV": 12
        },
        "knownComponentLimitA": 4,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 0.5508333333333334,
            "totalA": 0.5508333333333334,
            "upperA": 0.5508333333333334
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 1.4208333333333334,
            "totalA": 1.4208333333333334,
            "upperA": 1.4208333333333334
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 3.2208333333333337,
            "totalA": 3.2208333333333337,
            "upperA": 3.490833333333334
          }
        }
      },
      {
        "id": "logic",
        "label": "Declared 5 V converter output",
        "parentId": "source",
        "voltage": {
          "minV": 5,
          "maxV": 5
        },
        "knownComponentLimitA": 2,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        }
      }
    ],
    "bom": [
      [
        "role",
        "path",
        "component",
        "quantity",
        "productId",
        "variantId",
        "sourceRefs",
        "verification"
      ],
      [
        "servo",
        "source",
        "Feetech STS3215-C018",
        1,
        "lerobot-sts3215",
        "sts3215-c018",
        "c018-a0",
        "offline-configuration; hardware unverified"
      ],
      [
        "path component",
        "source",
        "Waveshare Bus Servo Adapter (A)",
        1,
        "lerobot-bus-adapter",
        "waveshare-bus-adapter-a",
        "waveshare-faq",
        "component rating only; assembled path unverified"
      ],
      [
        "logic load",
        "logic",
        "Arduino UNO Q",
        1,
        "uno-q-2gb",
        "abx00162",
        "unoq-r16;luwu-v11",
        "declared load; hardware unverified"
      ]
    ],
    "runtimeHours": null,
    "assumptions": [
      {
        "fieldPath": "paths.source.limitA",
        "value": 4,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration for this reference case: 4 A assembled-path limit; not a measurement."
      },
      {
        "fieldPath": "paths.logic.limitA",
        "value": 2,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified."
      },
      {
        "fieldPath": "loads.0.currentA",
        "evidence": "user-supplied",
        "value": 1,
        "unit": "A"
      }
    ],
    "checklist": [
      "confirm_revision",
      "confirm_polarity",
      "measure_rails",
      "single_servo",
      "scan_ids",
      "support_robot"
    ]
  }
}

Những điều ví dụ này chưa xác minh

  • Giới hạn, hiệu suất, tải và xác nhận cực tính đều là khai báo minh họa; đây là một nhánh servo, không phải tay máy hoàn chỉnh đã kiểm chứng.
  • Định mức linh kiện không chứng nhận đường nguồn đã lắp. Chưa kiểm chứng an toàn thực tế hay thời gian chạy.

Ngày tạo bản tham chiếu:

Nguồn thông số

Các liên kết dưới đây giữ tên gốc của tài liệu kỹ thuật. Hãy đọc phiên bản và ngày đối chiếu cùng với các giả định của ví dụ.

Quá tải liên tục vẫn bị chặn

Mức 5 A khai báo có đủ cho sáu C018 hoạt động không?

Phiên bản áp dụng: Microduck electrical rules 2026-11-12.2 · Robot profile SO-101 follower / LeRobot 0.7.0 · C018 current specification A/0 2023-07-20, 12 V test point

Dữ liệu đầu vào và các bước

Dùng điểm dòng chính thức 12 V, sáu servo đều hoạt động và giới hạn nguồn/đường dây giả định 5 A.

  1. Tính nhu cầu liên tục: 6 × 0.9 = 5.4 A.
  2. Tách tình huống kẹt: cơ bản 16.2 A, biên trên 17.82 A với +10%.
  3. Kiểm tra lại đầu vào đã đổi thành hai servo hoạt động được khai báo.

Kết quả kiểm tra tham chiếu

Không thể dùng cấu hình

Tình huống liên tục đã khai báo bị chặn vì 5.4 A vượt 5 A. Dòng kẹt vượt mức là rủi ro riêng cần xem xét.

Xem đầu vào và JSON tham chiếu
{
  "inputs": {
    "profileId": "so101-follower-v0.7.0",
    "supply": {
      "minV": 12,
      "maxV": 12,
      "continuousA": 5,
      "capacityMah": null,
      "nominalV": null,
      "chemistry": "external-dc",
      "polarityConfirmed": true
    },
    "paths": [
      {
        "id": "servo",
        "label": "12 V adapter and harness",
        "parentId": null,
        "mode": "pass",
        "componentIds": [
          "waveshare-adapter-a"
        ],
        "limitA": 5,
        "limitSource": "Synthetic user declaration for this case: 5 A source and path; not a measured harness rating.",
        "assembledVerified": false
      }
    ],
    "motors": [
      {
        "componentId": "sts3215-c018",
        "pathId": "servo",
        "count": 6,
        "activeCount": 6,
        "performanceV": 12
      }
    ],
    "loads": []
  },
  "status": "blocked",
  "findings": [
    {
      "code": "continuous_over_limit",
      "severity": "blocked",
      "fieldPath": "paths.servo",
      "messageKey": "continuous_over_limit",
      "details": {
        "scenario": "rated",
        "current": 5.4,
        "limit": 5,
        "path": "12 V adapter and harness"
      },
      "sourceRef": null
    },
    {
      "code": "stall_over_limit",
      "severity": "needs_review",
      "fieldPath": "paths.servo",
      "messageKey": "stall_over_limit",
      "details": {
        "scenario": "stall",
        "current": 17.82,
        "limit": 5,
        "path": "12 V adapter and harness"
      },
      "sourceRef": null
    },
    {
      "code": "continuous_over_limit",
      "severity": "blocked",
      "fieldPath": "supply.continuousA",
      "messageKey": "continuous_over_limit",
      "details": {
        "scenario": "rated",
        "current": 5.4,
        "limit": 5,
        "path": "supply"
      },
      "sourceRef": null
    },
    {
      "code": "stall_over_limit",
      "severity": "needs_review",
      "fieldPath": "supply.continuousA",
      "messageKey": "stall_over_limit",
      "details": {
        "scenario": "stall",
        "current": 17.82,
        "limit": 5,
        "path": "supply"
      },
      "sourceRef": null
    }
  ],
  "outputs": {
    "scenarios": {
      "idle": {
        "complete": true,
        "knownSubtotalA": 0.18,
        "totalA": 0.18,
        "upperA": 0.18,
        "paths": [
          {
            "id": "servo",
            "complete": true,
            "knownSubtotalA": 0.18,
            "totalA": 0.18,
            "upperA": 0.18
          }
        ]
      },
      "rated": {
        "complete": true,
        "knownSubtotalA": 5.4,
        "totalA": 5.4,
        "upperA": 5.4,
        "paths": [
          {
            "id": "servo",
            "complete": true,
            "knownSubtotalA": 5.4,
            "totalA": 5.4,
            "upperA": 5.4
          }
        ]
      },
      "stall": {
        "complete": true,
        "knownSubtotalA": 16.200000000000003,
        "totalA": 16.200000000000003,
        "upperA": 17.820000000000004,
        "paths": [
          {
            "id": "servo",
            "complete": true,
            "knownSubtotalA": 16.200000000000003,
            "totalA": 16.200000000000003,
            "upperA": 17.820000000000004
          }
        ]
      }
    },
    "paths": [
      {
        "id": "servo",
        "label": "12 V adapter and harness",
        "parentId": null,
        "voltage": {
          "minV": 12,
          "maxV": 12
        },
        "knownComponentLimitA": 5,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 0.18,
            "totalA": 0.18,
            "upperA": 0.18
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 5.4,
            "totalA": 5.4,
            "upperA": 5.4
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 16.200000000000003,
            "totalA": 16.200000000000003,
            "upperA": 17.820000000000004
          }
        }
      }
    ],
    "bom": [
      [
        "role",
        "path",
        "component",
        "quantity",
        "productId",
        "variantId",
        "sourceRefs",
        "verification"
      ],
      [
        "servo",
        "servo",
        "Feetech STS3215-C018",
        6,
        "lerobot-sts3215",
        "sts3215-c018",
        "c018-a0",
        "offline-configuration; hardware unverified"
      ],
      [
        "path component",
        "servo",
        "Waveshare Bus Servo Adapter (A)",
        1,
        "lerobot-bus-adapter",
        "waveshare-bus-adapter-a",
        "waveshare-faq",
        "component rating only; assembled path unverified"
      ]
    ],
    "runtimeHours": null,
    "assumptions": [
      {
        "fieldPath": "paths.servo.limitA",
        "value": 5,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration for this case: 5 A source and path; not a measured harness rating."
      }
    ],
    "checklist": [
      "confirm_revision",
      "confirm_polarity",
      "measure_rails",
      "single_servo",
      "scan_ids",
      "support_robot"
    ]
  }
}

Điều chỉnh rồi kiểm tra lại

Hai hoạt động cộng bốn chờ là 1.92 A, nhưng toàn bộ kẹt vẫn 16.2 A và biên trên 17.82 A. Báo cáo sau điều chỉnh vẫn cần xem xét.

Cần kiểm tra thêm

Xem JSON tham chiếu sau điều chỉnh
{
  "inputs": {
    "profileId": "so101-follower-v0.7.0",
    "supply": {
      "minV": 12,
      "maxV": 12,
      "continuousA": 5,
      "capacityMah": null,
      "nominalV": null,
      "chemistry": "external-dc",
      "polarityConfirmed": true
    },
    "paths": [
      {
        "id": "servo",
        "label": "12 V adapter and harness",
        "parentId": null,
        "mode": "pass",
        "componentIds": [
          "waveshare-adapter-a"
        ],
        "limitA": 5,
        "limitSource": "Synthetic user declaration for this case: 5 A source and path; not a measured harness rating.",
        "assembledVerified": false
      }
    ],
    "motors": [
      {
        "componentId": "sts3215-c018",
        "pathId": "servo",
        "count": 6,
        "activeCount": 2,
        "performanceV": 12
      }
    ],
    "loads": []
  },
  "status": "needs_review",
  "findings": [
    {
      "code": "stall_over_limit",
      "severity": "needs_review",
      "fieldPath": "paths.servo",
      "messageKey": "stall_over_limit",
      "details": {
        "scenario": "stall",
        "current": 17.82,
        "limit": 5,
        "path": "12 V adapter and harness"
      },
      "sourceRef": null
    },
    {
      "code": "stall_over_limit",
      "severity": "needs_review",
      "fieldPath": "supply.continuousA",
      "messageKey": "stall_over_limit",
      "details": {
        "scenario": "stall",
        "current": 17.82,
        "limit": 5,
        "path": "supply"
      },
      "sourceRef": null
    }
  ],
  "outputs": {
    "scenarios": {
      "idle": {
        "complete": true,
        "knownSubtotalA": 0.18,
        "totalA": 0.18,
        "upperA": 0.18,
        "paths": [
          {
            "id": "servo",
            "complete": true,
            "knownSubtotalA": 0.18,
            "totalA": 0.18,
            "upperA": 0.18
          }
        ]
      },
      "rated": {
        "complete": true,
        "knownSubtotalA": 1.92,
        "totalA": 1.92,
        "upperA": 1.92,
        "paths": [
          {
            "id": "servo",
            "complete": true,
            "knownSubtotalA": 1.92,
            "totalA": 1.92,
            "upperA": 1.92
          }
        ]
      },
      "stall": {
        "complete": true,
        "knownSubtotalA": 16.200000000000003,
        "totalA": 16.200000000000003,
        "upperA": 17.820000000000004,
        "paths": [
          {
            "id": "servo",
            "complete": true,
            "knownSubtotalA": 16.200000000000003,
            "totalA": 16.200000000000003,
            "upperA": 17.820000000000004
          }
        ]
      }
    },
    "paths": [
      {
        "id": "servo",
        "label": "12 V adapter and harness",
        "parentId": null,
        "voltage": {
          "minV": 12,
          "maxV": 12
        },
        "knownComponentLimitA": 5,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 0.18,
            "totalA": 0.18,
            "upperA": 0.18
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 1.92,
            "totalA": 1.92,
            "upperA": 1.92
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 16.200000000000003,
            "totalA": 16.200000000000003,
            "upperA": 17.820000000000004
          }
        }
      }
    ],
    "bom": [
      [
        "role",
        "path",
        "component",
        "quantity",
        "productId",
        "variantId",
        "sourceRefs",
        "verification"
      ],
      [
        "servo",
        "servo",
        "Feetech STS3215-C018",
        6,
        "lerobot-sts3215",
        "sts3215-c018",
        "c018-a0",
        "offline-configuration; hardware unverified"
      ],
      [
        "path component",
        "servo",
        "Waveshare Bus Servo Adapter (A)",
        1,
        "lerobot-bus-adapter",
        "waveshare-bus-adapter-a",
        "waveshare-faq",
        "component rating only; assembled path unverified"
      ]
    ],
    "runtimeHours": null,
    "assumptions": [
      {
        "fieldPath": "paths.servo.limitA",
        "value": 5,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration for this case: 5 A source and path; not a measured harness rating."
      }
    ],
    "checklist": [
      "confirm_revision",
      "confirm_polarity",
      "measure_rails",
      "single_servo",
      "scan_ids",
      "support_robot"
    ]
  }
}

Những điều ví dụ này chưa xác minh

  • Khai báo ít servo hoạt động hơn không cưỡng chế số servo đồng thời hay giới hạn dòng.
  • Mức tối đa 5 A của bo không phải bộ giới hạn tự động và không chứng minh khả năng chịu tải của dây.

Ngày tạo bản tham chiếu:

Nguồn thông số

Các liên kết dưới đây giữ tên gốc của tài liệu kỹ thuật. Hãy đọc phiên bản và ngày đối chiếu cùng với các giả định của ví dụ.

Phần dòng đã biết chưa phải tổng dòng

Có thể dùng dòng tại 12 V cho nguồn 8.4 V không?

Phiên bản áp dụng: Microduck electrical rules 2026-11-12.2 · Robot profile SO-101 follower / LeRobot 0.7.0 · C018 current specification A/0 2023-07-20, 12 V test point

Dữ liệu đầu vào và các bước

Khai báo 8.4 V, sáu C018 với hai hoạt động, bộ chuyển đổi 5 V hiệu suất 0.8 và tải bo giả định 1 A; giới hạn nguồn/đường dây 5 A.

  1. Phân biệt dải điện áp hoạt động và điểm thử dòng.
  2. Giữ dòng C018 tại 8.4 V ở trạng thái chưa biết, không nội suy.
  3. Chỉ tính phần logic đã biết: 5 × 1 / (8.4 × 0.8).

Kết quả kiểm tra tham chiếu

Cần kiểm tra thêm

Khoảng 0.744048 A chỉ là phần dòng đã biết ở phía nguồn. Nhu cầu servo, tổng dòng, biên trên và thời gian chạy vẫn chưa biết.

Xem đầu vào và JSON tham chiếu
{
  "inputs": {
    "profileId": "so101-follower-v0.7.0",
    "supply": {
      "minV": 8.4,
      "maxV": 8.4,
      "continuousA": 5,
      "capacityMah": null,
      "nominalV": null,
      "chemistry": "external-dc",
      "polarityConfirmed": true
    },
    "paths": [
      {
        "id": "source",
        "label": "Declared 8.4 V source and servo branch",
        "parentId": null,
        "mode": "pass",
        "componentIds": [
          "waveshare-adapter-a"
        ],
        "limitA": 5,
        "limitSource": "Synthetic user declaration: 5 A source/path; no assembled-path test.",
        "assembledVerified": false
      },
      {
        "id": "logic",
        "label": "Declared 5 V converter output",
        "parentId": "source",
        "mode": "regulated",
        "componentIds": [],
        "outputMinV": 5,
        "outputMaxV": 5,
        "efficiency": 0.8,
        "limitA": 2,
        "limitSource": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified.",
        "assembledVerified": false
      }
    ],
    "motors": [
      {
        "componentId": "sts3215-c018",
        "pathId": "source",
        "count": 6,
        "activeCount": 2,
        "performanceV": 8.4
      }
    ],
    "loads": [
      {
        "id": "uno-q",
        "componentId": "uno-q",
        "pathId": "logic",
        "port": "usb",
        "count": 1,
        "currentA": 1
      }
    ]
  },
  "status": "needs_review",
  "findings": [
    {
      "code": "current_unknown",
      "severity": "needs_review",
      "fieldPath": "motors.0",
      "messageKey": "current_unknown",
      "details": {
        "component": "Feetech STS3215-C018",
        "voltage": 8.4
      },
      "sourceRef": "c018-a0"
    }
  ],
  "outputs": {
    "scenarios": {
      "idle": {
        "complete": false,
        "knownSubtotalA": 0.744047619047619,
        "totalA": null,
        "upperA": null,
        "paths": [
          {
            "id": "source",
            "complete": false,
            "knownSubtotalA": 0.744047619047619,
            "totalA": null,
            "upperA": null
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      },
      "rated": {
        "complete": false,
        "knownSubtotalA": 0.744047619047619,
        "totalA": null,
        "upperA": null,
        "paths": [
          {
            "id": "source",
            "complete": false,
            "knownSubtotalA": 0.744047619047619,
            "totalA": null,
            "upperA": null
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      },
      "stall": {
        "complete": false,
        "knownSubtotalA": 0.744047619047619,
        "totalA": null,
        "upperA": null,
        "paths": [
          {
            "id": "source",
            "complete": false,
            "knownSubtotalA": 0.744047619047619,
            "totalA": null,
            "upperA": null
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      }
    },
    "paths": [
      {
        "id": "source",
        "label": "Declared 8.4 V source and servo branch",
        "parentId": null,
        "voltage": {
          "minV": 8.4,
          "maxV": 8.4
        },
        "knownComponentLimitA": 5,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": false,
            "knownSubtotalA": 0.744047619047619,
            "totalA": null,
            "upperA": null
          },
          "rated": {
            "complete": false,
            "knownSubtotalA": 0.744047619047619,
            "totalA": null,
            "upperA": null
          },
          "stall": {
            "complete": false,
            "knownSubtotalA": 0.744047619047619,
            "totalA": null,
            "upperA": null
          }
        }
      },
      {
        "id": "logic",
        "label": "Declared 5 V converter output",
        "parentId": "source",
        "voltage": {
          "minV": 5,
          "maxV": 5
        },
        "knownComponentLimitA": 2,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        }
      }
    ],
    "bom": [
      [
        "role",
        "path",
        "component",
        "quantity",
        "productId",
        "variantId",
        "sourceRefs",
        "verification"
      ],
      [
        "servo",
        "source",
        "Feetech STS3215-C018",
        6,
        "lerobot-sts3215",
        "sts3215-c018",
        "c018-a0",
        "offline-configuration; hardware unverified"
      ],
      [
        "path component",
        "source",
        "Waveshare Bus Servo Adapter (A)",
        1,
        "lerobot-bus-adapter",
        "waveshare-bus-adapter-a",
        "waveshare-faq",
        "component rating only; assembled path unverified"
      ],
      [
        "logic load",
        "logic",
        "Arduino UNO Q",
        1,
        "uno-q-2gb",
        "abx00162",
        "unoq-r16;luwu-v11",
        "declared load; hardware unverified"
      ]
    ],
    "runtimeHours": null,
    "assumptions": [
      {
        "fieldPath": "paths.source.limitA",
        "value": 5,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration: 5 A source/path; no assembled-path test."
      },
      {
        "fieldPath": "paths.logic.limitA",
        "value": 2,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified."
      },
      {
        "fieldPath": "loads.0.currentA",
        "evidence": "user-supplied",
        "value": 1,
        "unit": "A"
      }
    ],
    "checklist": [
      "confirm_revision",
      "confirm_polarity",
      "measure_rails",
      "single_servo",
      "scan_ids",
      "support_robot"
    ]
  }
}

Điều chỉnh rồi kiểm tra lại

Tại điểm 12 V riêng, nhu cầu nguồn định mức khoảng 2.440833 A. Biên trên khi kẹt là 18.340833 A nên vẫn cần xem xét.

Cần kiểm tra thêm

Xem JSON tham chiếu sau điều chỉnh
{
  "inputs": {
    "profileId": "so101-follower-v0.7.0",
    "supply": {
      "minV": 12,
      "maxV": 12,
      "continuousA": 5,
      "capacityMah": null,
      "nominalV": null,
      "chemistry": "external-dc",
      "polarityConfirmed": true
    },
    "paths": [
      {
        "id": "source",
        "label": "Declared 12 V source and servo branch",
        "parentId": null,
        "mode": "pass",
        "componentIds": [
          "waveshare-adapter-a"
        ],
        "limitA": 5,
        "limitSource": "Synthetic user declaration: 5 A source/path; no assembled-path test.",
        "assembledVerified": false
      },
      {
        "id": "logic",
        "label": "Declared 5 V converter output",
        "parentId": "source",
        "mode": "regulated",
        "componentIds": [],
        "outputMinV": 5,
        "outputMaxV": 5,
        "efficiency": 0.8,
        "limitA": 2,
        "limitSource": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified.",
        "assembledVerified": false
      }
    ],
    "motors": [
      {
        "componentId": "sts3215-c018",
        "pathId": "source",
        "count": 6,
        "activeCount": 2,
        "performanceV": 12
      }
    ],
    "loads": [
      {
        "id": "uno-q",
        "componentId": "uno-q",
        "pathId": "logic",
        "port": "usb",
        "count": 1,
        "currentA": 1
      }
    ]
  },
  "status": "needs_review",
  "findings": [
    {
      "code": "stall_over_limit",
      "severity": "needs_review",
      "fieldPath": "paths.source",
      "messageKey": "stall_over_limit",
      "details": {
        "scenario": "stall",
        "current": 18.341,
        "limit": 5,
        "path": "Declared 12 V source and servo branch"
      },
      "sourceRef": null
    },
    {
      "code": "stall_over_limit",
      "severity": "needs_review",
      "fieldPath": "supply.continuousA",
      "messageKey": "stall_over_limit",
      "details": {
        "scenario": "stall",
        "current": 18.341,
        "limit": 5,
        "path": "supply"
      },
      "sourceRef": null
    }
  ],
  "outputs": {
    "scenarios": {
      "idle": {
        "complete": true,
        "knownSubtotalA": 0.7008333333333334,
        "totalA": 0.7008333333333334,
        "upperA": 0.7008333333333334,
        "paths": [
          {
            "id": "source",
            "complete": true,
            "knownSubtotalA": 0.7008333333333334,
            "totalA": 0.7008333333333334,
            "upperA": 0.7008333333333334
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      },
      "rated": {
        "complete": true,
        "knownSubtotalA": 2.4408333333333334,
        "totalA": 2.4408333333333334,
        "upperA": 2.4408333333333334,
        "paths": [
          {
            "id": "source",
            "complete": true,
            "knownSubtotalA": 2.4408333333333334,
            "totalA": 2.4408333333333334,
            "upperA": 2.4408333333333334
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      },
      "stall": {
        "complete": true,
        "knownSubtotalA": 16.720833333333335,
        "totalA": 16.720833333333335,
        "upperA": 18.340833333333336,
        "paths": [
          {
            "id": "source",
            "complete": true,
            "knownSubtotalA": 16.720833333333335,
            "totalA": 16.720833333333335,
            "upperA": 18.340833333333336
          },
          {
            "id": "logic",
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        ]
      }
    },
    "paths": [
      {
        "id": "source",
        "label": "Declared 12 V source and servo branch",
        "parentId": null,
        "voltage": {
          "minV": 12,
          "maxV": 12
        },
        "knownComponentLimitA": 5,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 0.7008333333333334,
            "totalA": 0.7008333333333334,
            "upperA": 0.7008333333333334
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 2.4408333333333334,
            "totalA": 2.4408333333333334,
            "upperA": 2.4408333333333334
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 16.720833333333335,
            "totalA": 16.720833333333335,
            "upperA": 18.340833333333336
          }
        }
      },
      {
        "id": "logic",
        "label": "Declared 5 V converter output",
        "parentId": "source",
        "voltage": {
          "minV": 5,
          "maxV": 5
        },
        "knownComponentLimitA": 2,
        "assembledPathVerified": false,
        "scenarios": {
          "idle": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          },
          "rated": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          },
          "stall": {
            "complete": true,
            "knownSubtotalA": 1,
            "totalA": 1,
            "upperA": 1
          }
        }
      }
    ],
    "bom": [
      [
        "role",
        "path",
        "component",
        "quantity",
        "productId",
        "variantId",
        "sourceRefs",
        "verification"
      ],
      [
        "servo",
        "source",
        "Feetech STS3215-C018",
        6,
        "lerobot-sts3215",
        "sts3215-c018",
        "c018-a0",
        "offline-configuration; hardware unverified"
      ],
      [
        "path component",
        "source",
        "Waveshare Bus Servo Adapter (A)",
        1,
        "lerobot-bus-adapter",
        "waveshare-bus-adapter-a",
        "waveshare-faq",
        "component rating only; assembled path unverified"
      ],
      [
        "logic load",
        "logic",
        "Arduino UNO Q",
        1,
        "uno-q-2gb",
        "abx00162",
        "unoq-r16;luwu-v11",
        "declared load; hardware unverified"
      ]
    ],
    "runtimeHours": null,
    "assumptions": [
      {
        "fieldPath": "paths.source.limitA",
        "value": 5,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration: 5 A source/path; no assembled-path test."
      },
      {
        "fieldPath": "paths.logic.limitA",
        "value": 2,
        "unit": "A",
        "evidence": "user-supplied",
        "note": "Synthetic user declaration: 2 A output path and efficiency 0.8; no particular converter or harness verified."
      },
      {
        "fieldPath": "loads.0.currentA",
        "evidence": "user-supplied",
        "value": 1,
        "unit": "A"
      }
    ],
    "checklist": [
      "confirm_revision",
      "confirm_polarity",
      "measure_rails",
      "single_servo",
      "scan_ids",
      "support_robot"
    ]
  }
}

Những điều ví dụ này chưa xác minh

  • Đổi thiết kế sang 12 V tạo tình huống khai báo khác, không cung cấp dữ liệu cho 8.4 V.
  • Ví dụ C018 này không giải quyết mâu thuẫn điện áp tối thiểu riêng của C001 tại 5 V.

Ngày tạo bản tham chiếu:

Nguồn thông số

Các liên kết dưới đây giữ tên gốc của tài liệu kỹ thuật. Hãy đọc phiên bản và ngày đối chiếu cùng với các giả định của ví dụ.

Liên hệ