What it does
Connects a computer to CAN joint motors such as the DAMIAO DM-J4310, to set their IDs, modes and limits and to test them. It also works as a general CAN analyser and as a USB-to-TTL serial adapter.
- Protocols: CAN FD and CAN 2.0A/B, up to 5 Mbps in the CAN FD data phase.
- Isolation: the CAN side is isolated from the computer.
- Buffer: 64 KB.
- Connectors: USB-C to the computer; GH1.25 ports for CAN and UART, with a termination switch.
In the box
The module, a 300 mm 3-pin and a 300 mm 2-pin GH1.25 cable, and a USB-A to USB-C cable. The aluminium-case option has the same parts with the board in a metal case.
Specifications
- Protocols
- CAN FD and CAN 2.0A/B, up to 5 Mbps data phase
- Isolation
- Isolated CAN
- Host
- USB Type-C; also USB-to-TTL serial
- Motor side
- GH1.25 connectors with a termination switch
- Included
- Module, 300 mm 3-pin and 2-pin cables, USB-A to USB-C cable
Compatibility checks
- Turn the termination on only at the end of the CAN line.
- Use the maker's debugging tool or SDK to set IDs and modes.

